lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/9] dt-bindings: clock: Convert i.MX5 clock to json-schema
Date
Convert the i.MX5 clock binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/clock/imx5-clock.txt | 28 ----------
.../devicetree/bindings/clock/imx5-clock.yaml | 63 ++++++++++++++++++++++
2 files changed, 63 insertions(+), 28 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
deleted file mode 100644
index a24ca9e..0000000
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Clock bindings for Freescale i.MX5
-
-Required properties:
-- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
-for the full list of i.MX5 clock IDs.
-
-Examples (for mx53):
-
-clks: ccm@53fd4000{
- compatible = "fsl,imx53-ccm";
- reg = <0x53fd4000 0x4000>;
- interrupts = <0 71 0x04 0 72 0x04>;
- #clock-cells = <1>;
-};
-
-can1: can@53fc8000 {
- compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
- reg = <0x53fc8000 0x4000>;
- interrupts = <82>;
- clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
new file mode 100644
index 0000000..e4c405c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX5
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+ for the full list of i.MX5 clock IDs.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx53-ccm
+ - fsl,imx51-ccm
+ - fsl,imx50-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx5-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@53fd4000{
+ compatible = "fsl,imx53-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+ <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ };
+
+ can@53fc8000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fc8000 0x4000>;
+ interrupts = <82>;
+ clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+ clock-names = "ipg", "per";
+ };
--
2.7.4
\
 
 \ /
  Last update: 2020-05-28 09:39    [W:0.102 / U:12.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site