lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 6/9] dt-bindings: clock: Convert i.MX27 clock to json-schema
    Date
    Convert the i.MX27 clock binding to DT schema format using json-schema.

    Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
    ---
    .../devicetree/bindings/clock/imx27-clock.txt | 27 -----------
    .../devicetree/bindings/clock/imx27-clock.yaml | 53 ++++++++++++++++++++++
    2 files changed, 53 insertions(+), 27 deletions(-)
    delete mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.txt
    create mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.yaml

    diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt
    deleted file mode 100644
    index 4c95c04..0000000
    --- a/Documentation/devicetree/bindings/clock/imx27-clock.txt
    +++ /dev/null
    @@ -1,27 +0,0 @@
    -* Clock bindings for Freescale i.MX27
    -
    -Required properties:
    -- compatible: Should be "fsl,imx27-ccm"
    -- reg: Address and length of the register set
    -- interrupts: Should contain CCM interrupt
    -- #clock-cells: Should be <1>
    -
    -The clock consumer should specify the desired clock by having the clock
    -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
    -for the full list of i.MX27 clock IDs.
    -
    -Examples:
    - clks: ccm@10027000{
    - compatible = "fsl,imx27-ccm";
    - reg = <0x10027000 0x1000>;
    - #clock-cells = <1>;
    - };
    -
    - uart1: serial@1000a000 {
    - compatible = "fsl,imx27-uart", "fsl,imx21-uart";
    - reg = <0x1000a000 0x1000>;
    - interrupts = <20>;
    - clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
    - <&clks IMX27_CLK_PER1_GATE>;
    - clock-names = "ipg", "per";
    - };
    diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
    new file mode 100644
    index 0000000..2d69807
    --- /dev/null
    +++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
    @@ -0,0 +1,53 @@
    +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
    +%YAML 1.2
    +---
    +$id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
    +$schema: http://devicetree.org/meta-schemas/core.yaml#
    +
    +title: Clock bindings for Freescale i.MX27
    +
    +maintainers:
    + - Fabio Estevam <fabio.estevam@freescale.com>
    +
    +description: |
    + The clock consumer should specify the desired clock by having the clock
    + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
    + for the full list of i.MX27 clock IDs.
    +
    +properties:
    + compatible:
    + const: fsl,imx27-ccm
    +
    + reg:
    + maxItems: 1
    +
    + interrupts:
    + maxItems: 1
    +
    + '#clock-cells':
    + const: 1
    +
    +required:
    + - compatible
    + - reg
    + - '#clock-cells'
    +
    +examples:
    + - |
    + #include <dt-bindings/clock/imx27-clock.h>
    +
    + clock-controller@10027000 {
    + compatible = "fsl,imx27-ccm";
    + reg = <0x10027000 0x1000>;
    + interrupts = <31>;
    + #clock-cells = <1>;
    + };
    +
    + serial@1000a000 {
    + compatible = "fsl,imx27-uart", "fsl,imx21-uart";
    + reg = <0x1000a000 0x1000>;
    + interrupts = <20>;
    + clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
    + <&clks IMX27_CLK_PER1_GATE>;
    + clock-names = "ipg", "per";
    + };
    --
    2.7.4
    \
     
     \ /
      Last update: 2020-05-28 09:39    [W:3.740 / U:4.084 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site