lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/5] arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
On Thu 28 May 08:46 PDT 2020, Sumit Semwal wrote:

> From: Nisha Kumari <nishakumari@codeaurora.org>
>
> This patch adds devicetree nodes for LAB and IBB regulators.
>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>
> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
>
> --
> v2: sumits: updated for better compatible string and names
> v3: sumits: updated interrupt-names as per review comments
>
> ---
> arch/arm64/boot/dts/qcom/pmi8998.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> index 23f9146a161e..1a72fe92f1a6 100644
> --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> @@ -25,5 +25,19 @@ pmi8998_lsid1: pmic@3 {
> reg = <0x3 SPMI_USID>;
> #address-cells = <1>;
> #size-cells = <0>;
> +
> + labibb: labibb {

Although I don't see any reason to reference this node as of today, so
it doesn't really need a label.

Regards,
Bjorn

> + compatible = "qcom,pmi8998-lab-ibb";
> +
> + ibb: ibb {
> + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "sc-err";
> + };
> +
> + lab: lab {
> + interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "sc-err";
> + };
> + };
> };
> };
> --
> 2.26.2
>

\
 
 \ /
  Last update: 2020-05-29 03:45    [W:0.594 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site