[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 08/10] clk: qcom: Add graphics clock controller driver for SM8250
On Mon 25 May 02:47 PDT 2020, Sai Prakash Ranjan wrote:

> Hi Jonathan,
> On 2020-05-25 02:36, Jonathan Marek wrote:
> > Add support for the graphics clock controller found on SM8250
> > based devices. This would allow graphics drivers to probe and
> > control their clocks.
> >
> > This is copied from the downstream kernel, adapted for upstream.
> > For example, GDSCs have been added.
> >
> > Signed-off-by: Jonathan Marek <>
> Since this is taken from downstream, maintain the original author's
> signed-off and add yourself as the co-developer if you have done
> any modifications. Same applies to all other patches.

I disagree with this.

As expressed in the commit message, this patch is based on the
downstream driver, not the individual patch. As such, the _patch_ is
prepared by Jonathan and by his Signed-off-by certifies the origin of
the contribution per section 11.a or 11.b of submitting-patches.rst.

Regarding co-developed-by; this should not be used when "forwarding" an
existing patch. Per section 11.c the contributor should add their
Signed-off-by to certify the origin of the patch. Any modifications
should be documented in immediately proceeding the s-o-b, as described
later in section 11.


 \ /
  Last update: 2020-05-29 03:13    [W:0.097 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site