lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts
Date
BCM7211 supports wake-up interrupts in the form of optional interrupt
lines, one per bank, plus the "all banks" interrupt line.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
.../devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index dfc67b90591c..5682b2010e50 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -16,7 +16,9 @@ Required properties:
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
- interrupts : The interrupt outputs from the controller. One interrupt per
- individual bank followed by the "all banks" interrupt.
+ individual bank followed by the "all banks" interrupt. For BCM7211, an
+ additional set of per-bank interrupt line and an "all banks" wake-up
+ interrupt may be specified.
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells : Should be 2.
The first cell is the GPIO number.
--
2.17.1
\
 
 \ /
  Last update: 2020-05-28 21:25    [W:0.071 / U:3.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site