lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] dt-bindings: pinctrl: Document 7211 compatible for brcm,bcm2835-gpio.txt
Date
Document the brcm,bcm7211-gpio compatible string in the
brcm,bcm2835-gpio.txt document.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index 3cab7336a326..dfc67b90591c 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -9,6 +9,7 @@ Required properties:
"brcm,bcm2835-gpio" - BCM2835 compatible pinctrl
"brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
"brcm,bcm2711-gpio" - BCM2711 compatible pinctrl
+ "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
- reg: Should contain the physical address of the GPIO module's registers.
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells : Should be two. The first cell is the pin number and the
--
2.17.1
\
 
 \ /
  Last update: 2020-05-28 21:22    [W:0.073 / U:7.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site