lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 14/16] soc: mediatek: cmdq: add jump function
Date
Add jump function so that client can jump to any address which
contains instruction.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 13 +++++++++++++
include/linux/soc/mediatek/mtk-cmdq.h | 11 +++++++++++
2 files changed, 24 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index ebcdd30cd783..5cf9e71b7900 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -13,6 +13,7 @@
#define CMDQ_POLL_ENABLE_MASK BIT(0)
#define CMDQ_EOC_IRQ_EN BIT(0)
#define CMDQ_REG_TYPE 1
+#define CMDQ_JUMP_RELATIVE 1

struct cmdq_instruction {
union {
@@ -391,6 +392,18 @@ int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
}
EXPORT_SYMBOL(cmdq_pkt_assign);

+int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr)
+{
+ struct cmdq_instruction inst = { {0} };
+
+ inst.op = CMDQ_CODE_JUMP;
+ inst.offset = CMDQ_JUMP_RELATIVE;
+ inst.value = addr >>
+ cmdq_mbox_shift(((struct cmdq_client *)pkt->cl)->chan);
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_jump);
+
int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
{
struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 703cffcd55bd..9494b293bad9 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -244,6 +244,17 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
*/
int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value);

+/**
+ * cmdq_pkt_jump() - Append jump command to the CMDQ packet, ask GCE
+ * to execute an instruction that change current thread PC to
+ * a physical address which should contains more instruction.
+ * @pkt: the CMDQ packet
+ * @addr: physical address of target instruction buffer
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr);
+
/**
* cmdq_pkt_finalize() - Append EOC and jump command to pkt.
* @pkt: the CMDQ packet
--
2.18.0
\
 
 \ /
  Last update: 2020-05-28 19:06    [W:0.188 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site