lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/5] arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
Date
From: Nisha Kumari <nishakumari@codeaurora.org>

This patch adds devicetree nodes for LAB and IBB regulators.

Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

--
v2: sumits: updated for better compatible string and names
v3: sumits: updated interrupt-names as per review comments

---
arch/arm64/boot/dts/qcom/pmi8998.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index 23f9146a161e..1a72fe92f1a6 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -25,5 +25,19 @@ pmi8998_lsid1: pmic@3 {
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ labibb: labibb {
+ compatible = "qcom,pmi8998-lab-ibb";
+
+ ibb: ibb {
+ interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "sc-err";
+ };
+
+ lab: lab {
+ interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "sc-err";
+ };
+ };
};
};
--
2.26.2
\
 
 \ /
  Last update: 2020-05-28 17:48    [W:0.103 / U:1.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site