lkml.org 
[lkml]   [2020]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 16/25] clk: bcm: rpi: Rename is_prepared function
Date
The raspberrypi_fw_pll_is_on function doesn't only apply to PLL
registered in the driver, but any clock exposed by the firmware.

Since we also implement the is_prepared hook, make the function
consistent with the other function names.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/clk/bcm/clk-raspberrypi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 3fce49a65a79..58ac1b104429 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -85,7 +85,7 @@ static int raspberrypi_clock_property(struct rpi_firmware *firmware,
return 0;
}

-static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
+static int raspberrypi_fw_is_prepared(struct clk_hw *hw)
{
struct raspberrypi_clk_data *data =
container_of(hw, struct raspberrypi_clk_data, hw);
@@ -166,7 +166,7 @@ static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
}

static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
- .is_prepared = raspberrypi_fw_pll_is_on,
+ .is_prepared = raspberrypi_fw_is_prepared,
.recalc_rate = raspberrypi_fw_pll_get_rate,
.set_rate = raspberrypi_fw_pll_set_rate,
.determine_rate = raspberrypi_pll_determine_rate,
--
git-series 0.9.1
\
 
 \ /
  Last update: 2020-05-27 17:47    [W:0.224 / U:2.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site