lkml.org 
[lkml]   [2020]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: davinci: fix build failure without I2C
Date
The two supplies are referenced outside of #ifdef CONFIG_I2C but
defined inside, which breaks the build if that is not built-in:

mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
^
mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
mach-davinci/board-dm644x-evm.c:860:49: error: use of undeclared identifier 'fixed_supplies_1_8v'
regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,

I don't know if the regulators are used anywhere without I2C, but
always registering them seems to be the safe choice here.

On a related note, it might be best to also deal with CONFIG_I2C=m
across the file, unless this is going to be moved to DT and removed
really soon anyway.

Fixes: 5e06d19694a4 ("ARM: davinci: dm644x-evm: Add Fixed regulators needed for tlv320aic33")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-davinci/board-dm644x-evm.c | 26 ++++++++++++------------
1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 3461d12bbfc0..a5d3708fedf6 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -655,19 +655,6 @@ static struct i2c_board_info __initdata i2c_info[] = {
},
};

-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
- /* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
- REGULATOR_SUPPLY("AVDD", "1-001b"),
- REGULATOR_SUPPLY("DRVDD", "1-001b"),
-};
-
-static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
- /* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
- REGULATOR_SUPPLY("IOVDD", "1-001b"),
- REGULATOR_SUPPLY("DVDD", "1-001b"),
-};
-
#define DM644X_I2C_SDA_PIN GPIO_TO_PIN(2, 12)
#define DM644X_I2C_SCL_PIN GPIO_TO_PIN(2, 11)

@@ -700,6 +687,19 @@ static void __init evm_init_i2c(void)
}
#endif

+/* Fixed regulator support */
+static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
+ /* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
+ REGULATOR_SUPPLY("AVDD", "1-001b"),
+ REGULATOR_SUPPLY("DRVDD", "1-001b"),
+};
+
+static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
+ /* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
+ REGULATOR_SUPPLY("IOVDD", "1-001b"),
+ REGULATOR_SUPPLY("DVDD", "1-001b"),
+};
+
#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)

/* venc standard timings */
--
2.26.2
\
 
 \ /
  Last update: 2020-05-27 15:38    [W:0.041 / U:4.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site