lkml.org 
[lkml]   [2020]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv1 2/2] dt-bindings: power: supply: gpio-charger: convert to yaml
On Wed, May 13, 2020 at 01:56:01PM +0200, Sebastian Reichel wrote:
> Convert the gpio-charger bindings from text format to
> new YAML based representation.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
> .../bindings/power/supply/gpio-charger.txt | 38 ----------
> .../bindings/power/supply/gpio-charger.yaml | 75 +++++++++++++++++++
> 2 files changed, 75 insertions(+), 38 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/power/supply/gpio-charger.txt
> create mode 100644 Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
>
> diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.txt b/Documentation/devicetree/bindings/power/supply/gpio-charger.txt
> deleted file mode 100644
> index dbfd29029f69..000000000000
> --- a/Documentation/devicetree/bindings/power/supply/gpio-charger.txt
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -gpio-charger
> -
> -Required properties :
> - - compatible : "gpio-charger"
> - - charger-type : power supply type, one of
> - unknown
> - battery
> - ups
> - mains
> - usb-sdp (USB standard downstream port)
> - usb-dcp (USB dedicated charging port)
> - usb-cdp (USB charging downstream port)
> - usb-aca (USB accessory charger adapter)
> -
> -Optional properties:
> - - gpios : GPIO indicating the charger presence.
> - See GPIO binding in bindings/gpio/gpio.txt .
> - - charge-status-gpios: GPIO indicating whether a battery is charging.
> - - charge-current-limit-gpios: Output GPIOs specifiers for limiting the charge current
> - - charge-current-limit-mapping: List of touples with current in uA and a GPIO bitmap (in this order).
> - The GPIOs are encoded in the same order as specified in charge-current-limit-gpios.
> - The touples must be provided in descending order of the current limit.
> -
> -Example:
> -
> - usb_charger: charger {
> - compatible = "gpio-charger";
> - charger-type = "usb-sdp";
> - gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
> - charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
> -
> - charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>, <&gpioA 12 GPIO_ACTIVE_HIGH>;
> - charge-current-limit-mapping = <2500000 0x00>, <700000 0x01>, <0 0x02>;
> - };
> -
> - battery {
> - power-supplies = <&usb_charger>;
> - };
> diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
> new file mode 100644
> index 000000000000..14fb3e54f861
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/supply/gpio-charger.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: simple battery chargers only communicating through GPIOs
> +
> +maintainers:
> + - Sebastian Reichel <sre@kernel.org>
> +
> +description: |

Can drop '|' if formatting is not important.

> + This binding is for all chargers, which are working more
> + or less autonomously, only providing some status GPIOs
> + and possibly some GPIOs for limited control over the
> + charging process.
> +
> +properties:
> + compatible:
> + const: gpio-charger
> +
> + charger-type:
> + oneOf:
> + - const: unknown
> + - const: battery
> + - const: ups
> + - const: mains
> + - const: usb-sdp # USB standard downstream port
> + - const: usb-dcp # USB dedicated charging port
> + - const: usb-cdp # USB charging downstream port
> + - const: usb-aca # USB accessory charger adapter

Use enum rather than oneOf+const

Should have a description too.

> +
> + gpios:
> + maxItems: 1
> + description: GPIO indicating the charger presence
> +
> + charge-status-gpios:
> + maxItems: 1
> + description: GPIO indicating the charging status
> +
> + charge-current-limit-gpios:
> + minItems: 1
> + maxItems: 32
> + description: GPIOs used for current limiting
> +
> + charge-current-limit-mapping:
> + description: List of touples with current in uA and a GPIO bitmap (in
> + this order). The GPIOs are encoded in the same order as specified in
> + charge-current-limit-gpios. The touples must be provided in descending
> + order of the current limit.
> + $ref: "/meta-schemas/cell.yaml#array"

That's a first... A meta-schema is what checks this document. Not what
you want. Should be like this:

$ref: /schemas/types.yaml#/definitions/uint32-matrix
items:
items:
- description: Current limit in uA
- description: Encoded GPIO setting...

I guess there's not any more constraints we can add here.

> +
> +required:
> + - compatible

blank line

At least 1 of the gpio properties is required, right? Can be expressed
with required entries under a oneOf or anyOf.

> +additionalProperties: false
> +
> +dependencies:
> + charge-current-limit-gpios: [ charge-current-limit-mapping ]
> + charge-current-limit-mapping: [ charge-current-limit-gpios ]
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + charger {
> + compatible = "gpio-charger";
> + charger-type = "usb-sdp";
> +
> + gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
> + charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
> +
> + charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>,
> + <&gpioA 12 GPIO_ACTIVE_HIGH>;
> + charge-current-limit-mapping = <2500000 0x00>, <700000 0x01>, <0 0x02>;
> + };
> --
> 2.26.2
>

\
 
 \ /
  Last update: 2020-05-28 04:07    [W:2.326 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site