lkml.org 
[lkml]   [2020]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 102/105] drm/vc4: hdmi: Switch to blank pixels when disabled
Date
In order to avoid pixels getting stuck in an unflushable FIFO, we need when
we disable the HDMI controller to switch away from getting our pixels from
the pixelvalve and instead use blank pixels, and switch back to the
pixelvalve when we enable the HDMI controller.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 9 +++++++++
drivers/gpu/drm/vc4/vc4_regs.h | 3 +++
2 files changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index d889a83a0f56..8c9cff9ce216 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -325,6 +325,12 @@ static void vc4_hdmi_encoder_post_crtc_disable(struct drm_encoder *encoder)
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);

HDMI_WRITE(HDMI_RAM_PACKET_CONFIG, 0);
+
+ HDMI_WRITE(HDMI_VID_CTL, HDMI_READ(HDMI_VID_CTL) |
+ VC4_HD_VID_CTL_CLRRGB | VC4_HD_VID_CTL_CLRSYNC);
+
+ HDMI_WRITE(HDMI_VID_CTL,
+ HDMI_READ(HDMI_VID_CTL) | VC4_HD_VID_CTL_BLANKPIX);
}

static void vc4_hdmi_encoder_post_crtc_powerdown(struct drm_encoder *encoder)
@@ -563,6 +569,9 @@ static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder)
(vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
(hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));

+ HDMI_WRITE(HDMI_VID_CTL,
+ HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_BLANKPIX);
+
if (vc4_encoder->hdmi_monitor) {
HDMI_WRITE(HDMI_SCHEDULER_CONTROL,
HDMI_READ(HDMI_SCHEDULER_CONTROL) |
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 5a3ee2030cff..ce103f925f05 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -723,6 +723,9 @@
# define VC4_HD_VID_CTL_FRAME_COUNTER_RESET BIT(29)
# define VC4_HD_VID_CTL_VSYNC_LOW BIT(28)
# define VC4_HD_VID_CTL_HSYNC_LOW BIT(27)
+# define VC4_HD_VID_CTL_CLRSYNC BIT(24)
+# define VC4_HD_VID_CTL_CLRRGB BIT(23)
+# define VC4_HD_VID_CTL_BLANKPIX BIT(18)

# define VC4_HD_CSC_CTL_ORDER_MASK VC4_MASK(7, 5)
# define VC4_HD_CSC_CTL_ORDER_SHIFT 5
--
git-series 0.9.1
\
 
 \ /
  Last update: 2020-05-27 17:54    [W:0.287 / U:1.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site