lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 07/12] i2c: designware: Move Baytrail sem config to the platform if-clause
On Mon, May 25, 2020 at 04:01:26PM +0300, Jarkko Nikula wrote:
> On 5/21/20 5:22 AM, Serge Semin wrote:
> > On Wed, May 20, 2020 at 03:16:14PM +0300, Jarkko Nikula wrote:
> > > On 5/10/20 12:50 PM, Serge Semin wrote:
> > > > Currently Intel Baytrail I2C semaphore is a feature of the DW APB I2C
> > > > platform driver. It's a bit confusing to see it's config in the menu at
> > > > some separated place with no reference to the platform code. Lets move the
> > > > config definition under the if-I2C_DESIGNWARE_PLATFORM clause. By doing so
> > > > the config menu will display the feature right below the DW I2C platform
> > > > driver item and will indent it to the right so signifying its belonging.
> > > >
> > > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > > > Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> > > > Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> > > > Cc: Paul Burton <paulburton@kernel.org>
> > > > Cc: Ralf Baechle <ralf@linux-mips.org>
> > > > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > > > Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
> > > > Cc: Wolfram Sang <wsa@the-dreams.de>
> > > > Cc: Rob Herring <robh+dt@kernel.org>
> > > > Cc: Frank Rowand <frowand.list@gmail.com>
> > > > Cc: linux-mips@vger.kernel.org
> > > > Cc: devicetree@vger.kernel.org
> > > > ---
> > > > drivers/i2c/busses/Kconfig | 30 +++++++++++++++++-------------
> > > > 1 file changed, 17 insertions(+), 13 deletions(-)
> > > >
> > > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> > > > index 368aa64e9266..ed6927c4c540 100644
> > > > --- a/drivers/i2c/busses/Kconfig
> > > > +++ b/drivers/i2c/busses/Kconfig
> > > > @@ -530,8 +530,8 @@ config I2C_DESIGNWARE_CORE
> > > > config I2C_DESIGNWARE_PLATFORM
> > > > tristate "Synopsys DesignWare Platform"
> > > > - select I2C_DESIGNWARE_CORE
> > > > depends on (ACPI && COMMON_CLK) || !ACPI
> > > > + select I2C_DESIGNWARE_CORE
> > > > help
> > > > If you say yes to this option, support will be included for the
> > > > Synopsys DesignWare I2C adapter.
> > > > @@ -539,6 +539,22 @@ config I2C_DESIGNWARE_PLATFORM
> > > > This driver can also be built as a module. If so, the module
> > > > will be called i2c-designware-platform.
> > > > +if I2C_DESIGNWARE_PLATFORM
> > > > +
> > > > +config I2C_DESIGNWARE_BAYTRAIL
> > > > + bool "Intel Baytrail I2C semaphore support"
> > > > + depends on ACPI
> > > > + depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
> > > > + (I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
> > > > + help
> > > > + This driver enables managed host access to the PMIC I2C bus on select
> > > > + Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows
> > > > + the host to request uninterrupted access to the PMIC's I2C bus from
> > > > + the platform firmware controlling it. You should say Y if running on
> > > > + a BayTrail system using the AXP288.
> > > > +
> > > > +endif # I2C_DESIGNWARE_PLATFORM
> > > > +
> > >
> > > Is the added "if I2C_DESIGNWARE_PLATFORM" needed here? Should the "depends
> > > on" be enough?
> >
> > The idea was to add if-endif clause here for features possibly added sometime
> > in future. But using normal "depends on I2C_DESIGNWARE_PLATFORM" shall make
> > the config depicted as an indented sub-config as well. Would you like me to
> > remove the if-clause and use the depends on operator instead?
> >
> Yes, please remove it from this patch. Keeps this patch simpler and if some
> future feature needs it then that patch(set) is the right place to add it.

Agreed. I'll do this in v3.

-Sergey

>
> Jarkko

\
 
 \ /
  Last update: 2020-05-26 20:40    [W:0.056 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site