lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v11 1/5] PCI: Don't disable decoding when mmio_always_on is set
Date
Don't disable MEM/IO decoding when a device have both non_compliant_bars
and mmio_always_on.

That would allow us quirk devices with junk in BARs but can't disable
their decoding.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Bjorn Helgaas <helgaas@kernel.org>
---
drivers/pci/probe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 77b8a145c39b..d9c2c3301a8a 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1822,7 +1822,7 @@ int pci_setup_device(struct pci_dev *dev)
/* Device class may be changed after fixup */
class = dev->class >> 8;

- if (dev->non_compliant_bars) {
+ if (dev->non_compliant_bars && !dev->mmio_always_on) {
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
--
2.27.0.rc0
\
 
 \ /
  Last update: 2020-05-26 11:23    [W:0.169 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site