lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v8 06/14] media: platform: Improve the implementation of the system PM ops
From
Date
On Thu, 2020-05-21 at 15:32 +0000, Tomasz Figa wrote:
> Hi Xia,
>
> On Fri, Apr 03, 2020 at 05:40:25PM +0800, Xia Jiang wrote:
> > Cancel reset hw operation in suspend and resume function because this
> > will be done in device_run().
>
> This and...
>
> > Add spin_lock and unlock operation in irq and resume function to make
> > sure that the current frame is processed completely before suspend.
>
> ...this are two separate changes. Please split.
>
> >
> > Signed-off-by: Xia Jiang <xia.jiang@mediatek.com>
> > ---
> > drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 11 +++++++++--
> > 1 file changed, 9 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > index dd5cadd101ef..2fa3711fdc9b 100644
> > --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > @@ -911,6 +911,8 @@ static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
> > u32 dec_ret;
> > int i;
> >
> > + spin_lock(&jpeg->hw_lock);
> > +
>
> nit: For consistency, it is recommended to always use the same, i.e. the
> strongest, spin_(un)lock_ primitives when operating on the same spinlock.
> In this case it would be the irqsave(restore) variants.
>
> > dec_ret = mtk_jpeg_dec_get_int_status(jpeg->dec_reg_base);
> > dec_irq_ret = mtk_jpeg_dec_enum_result(dec_ret);
> > ctx = v4l2_m2m_get_curr_priv(jpeg->m2m_dev);
> > @@ -941,6 +943,7 @@ static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
> > v4l2_m2m_buf_done(src_buf, buf_state);
> > v4l2_m2m_buf_done(dst_buf, buf_state);
> > v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
> > + spin_unlock(&jpeg->hw_lock);
> > pm_runtime_put_sync(ctx->jpeg->dev);
> > return IRQ_HANDLED;
> > }
> > @@ -1191,7 +1194,6 @@ static __maybe_unused int mtk_jpeg_pm_suspend(struct device *dev)
> > {
> > struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev);
> >
> > - mtk_jpeg_dec_reset(jpeg->dec_reg_base);
> > mtk_jpeg_clk_off(jpeg);
> >
> > return 0;
> > @@ -1202,19 +1204,24 @@ static __maybe_unused int mtk_jpeg_pm_resume(struct device *dev)
> > struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev);
> >
> > mtk_jpeg_clk_on(jpeg);
> > - mtk_jpeg_dec_reset(jpeg->dec_reg_base);
> >
> > return 0;
> > }
> >
> > static __maybe_unused int mtk_jpeg_suspend(struct device *dev)
> > {
> > + struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev);
> > + unsigned long flags;
> > int ret;
> >
> > if (pm_runtime_suspended(dev))
> > return 0;
> >
> > + spin_lock_irqsave(&jpeg->hw_lock, flags);
>
> What does this spinlock protect us from? I can see that it would prevent
> the interrupt handler from being called, but is it okay to suspend the
> system without handling the interrupt?
Dear Tomasz,
I mean that if current image is processed in irq handler,suspend
function can not get the lock(it was locked in irq handler).Should I
move the spin_lock_irqsave(&jpeg->hw_lock, flags) to the start location
of suspend function or use wait_event_timeout() to handle the interrupt
before suspend?

Best Regards,
Xia Jiang
>
> > +
> > ret = mtk_jpeg_pm_suspend(dev);
> > +
>
> Looking at the implementation of mtk_jpeg_pm_suspend(), all it does is
> disabling the clock. How do we make sure that there is no frame currently
> being processed by the hardware?
>
> Best regards,
> Tomasz

\
 
 \ /
  Last update: 2020-05-27 03:59    [W:0.081 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site