lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 1/4] net: phy: mscc-miim: use more reasonable delays
On 26/05/2020 18:22:53+0200, Antoine Ténart wrote:
> The MSCC MIIM MDIO driver uses delays to read poll a status register. I
> made multiple tests on a Ocelot PCS120 platform which led me to reduce
> those delays. The delay in between which the polling function is allowed
> to sleep is reduced from 100us to 50us which in almost all cases is a
> good value to succeed at the first retry. The overall delay is also
> lowered as the prior value was really way to high, 10000us is large
> enough.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> drivers/net/phy/mdio-mscc-miim.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/mdio-mscc-miim.c b/drivers/net/phy/mdio-mscc-miim.c
> index badbc99bedd3..0b7544f593fb 100644
> --- a/drivers/net/phy/mdio-mscc-miim.c
> +++ b/drivers/net/phy/mdio-mscc-miim.c
> @@ -44,7 +44,7 @@ static int mscc_miim_wait_ready(struct mii_bus *bus)
> u32 val;
>
> readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
> - !(val & MSCC_MIIM_STATUS_STAT_BUSY), 100, 250000);
> + !(val & MSCC_MIIM_STATUS_STAT_BUSY), 50, 10000);
> if (val & MSCC_MIIM_STATUS_STAT_BUSY)
> return -ETIMEDOUT;
>
> --
> 2.26.2
>

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-05-26 23:05    [W:0.139 / U:5.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site