lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 074/111] drm/i915/gvt: Init DPLL/DDI vreg for virtual display instead of inheritance.
Date
From: Colin Xu <colin.xu@intel.com>

commit f965b68188ab59a40a421ced1b05a2fea638465c upstream.

Init value of some display vregs rea inherited from host pregs. When
host display in different status, i.e. all monitors unpluged, different
display configurations, etc., GVT virtual display setup don't consistent
thus may lead to guest driver consider display goes malfunctional.

The added init vreg values are based on PRMs and fixed by calcuation
from current configuration (only PIPE_A) and the virtual EDID.

Fixes: 04d348ae3f0a ("drm/i915/gvt: vGPU display virtualization")
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200508060506.216250-1-colin.xu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/gpu/drm/i915/gvt/display.c | 49 +++++++++++++++++++++++++++++++++----
1 file changed, 44 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/i915/gvt/display.c
+++ b/drivers/gpu/drm/i915/gvt/display.c
@@ -207,14 +207,41 @@ static void emulate_monitor_status_chang
SKL_FUSE_PG_DIST_STATUS(SKL_PG0) |
SKL_FUSE_PG_DIST_STATUS(SKL_PG1) |
SKL_FUSE_PG_DIST_STATUS(SKL_PG2);
- vgpu_vreg_t(vgpu, LCPLL1_CTL) |=
- LCPLL_PLL_ENABLE |
- LCPLL_PLL_LOCK;
- vgpu_vreg_t(vgpu, LCPLL2_CTL) |= LCPLL_PLL_ENABLE;
-
+ /*
+ * Only 1 PIPE enabled in current vGPU display and PIPE_A is
+ * tied to TRANSCODER_A in HW, so it's safe to assume PIPE_A,
+ * TRANSCODER_A can be enabled. PORT_x depends on the input of
+ * setup_virtual_dp_monitor, we can bind DPLL0 to any PORT_x
+ * so we fixed to DPLL0 here.
+ * Setup DPLL0: DP link clk 1620 MHz, non SSC, DP Mode
+ */
+ vgpu_vreg_t(vgpu, DPLL_CTRL1) =
+ DPLL_CTRL1_OVERRIDE(DPLL_ID_SKL_DPLL0);
+ vgpu_vreg_t(vgpu, DPLL_CTRL1) |=
+ DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, DPLL_ID_SKL_DPLL0);
+ vgpu_vreg_t(vgpu, LCPLL1_CTL) =
+ LCPLL_PLL_ENABLE | LCPLL_PLL_LOCK;
+ vgpu_vreg_t(vgpu, DPLL_STATUS) = DPLL_LOCK(DPLL_ID_SKL_DPLL0);
+ /*
+ * Golden M/N are calculated based on:
+ * 24 bpp, 4 lanes, 154000 pixel clk (from virtual EDID),
+ * DP link clk 1620 MHz and non-constant_n.
+ * TODO: calculate DP link symbol clk and stream clk m/n.
+ */
+ vgpu_vreg_t(vgpu, PIPE_DATA_M1(TRANSCODER_A)) = 63 << TU_SIZE_SHIFT;
+ vgpu_vreg_t(vgpu, PIPE_DATA_M1(TRANSCODER_A)) |= 0x5b425e;
+ vgpu_vreg_t(vgpu, PIPE_DATA_N1(TRANSCODER_A)) = 0x800000;
+ vgpu_vreg_t(vgpu, PIPE_LINK_M1(TRANSCODER_A)) = 0x3cd6e;
+ vgpu_vreg_t(vgpu, PIPE_LINK_N1(TRANSCODER_A)) = 0x80000;
}

if (intel_vgpu_has_monitor_on_port(vgpu, PORT_B)) {
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) &=
+ ~DPLL_CTRL2_DDI_CLK_OFF(PORT_B);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_CLK_SEL(DPLL_ID_SKL_DPLL0, PORT_B);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_SEL_OVERRIDE(PORT_B);
vgpu_vreg_t(vgpu, SFUSE_STRAP) |= SFUSE_STRAP_DDIB_DETECTED;
vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) &=
~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |
@@ -235,6 +262,12 @@ static void emulate_monitor_status_chang
}

if (intel_vgpu_has_monitor_on_port(vgpu, PORT_C)) {
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) &=
+ ~DPLL_CTRL2_DDI_CLK_OFF(PORT_C);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_CLK_SEL(DPLL_ID_SKL_DPLL0, PORT_C);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_SEL_OVERRIDE(PORT_C);
vgpu_vreg_t(vgpu, SDEISR) |= SDE_PORTC_HOTPLUG_CPT;
vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) &=
~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |
@@ -255,6 +288,12 @@ static void emulate_monitor_status_chang
}

if (intel_vgpu_has_monitor_on_port(vgpu, PORT_D)) {
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) &=
+ ~DPLL_CTRL2_DDI_CLK_OFF(PORT_D);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_CLK_SEL(DPLL_ID_SKL_DPLL0, PORT_D);
+ vgpu_vreg_t(vgpu, DPLL_CTRL2) |=
+ DPLL_CTRL2_DDI_SEL_OVERRIDE(PORT_D);
vgpu_vreg_t(vgpu, SDEISR) |= SDE_PORTD_HOTPLUG_CPT;
vgpu_vreg_t(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) &=
~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |

\
 
 \ /
  Last update: 2020-05-26 21:23    [W:0.621 / U:3.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site