lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 81/81] make user_access_begin() do access_ok()
Date
From: Linus Torvalds <torvalds@linux-foundation.org>

commit 594cc251fdd0d231d342d88b2fdff4bc42fb0690 upstream.

Originally, the rule used to be that you'd have to do access_ok()
separately, and then user_access_begin() before actually doing the
direct (optimized) user access.

But experience has shown that people then decide not to do access_ok()
at all, and instead rely on it being implied by other operations or
similar. Which makes it very hard to verify that the access has
actually been range-checked.

If you use the unsafe direct user accesses, hardware features (either
SMAP - Supervisor Mode Access Protection - on x86, or PAN - Privileged
Access Never - on ARM) do force you to use user_access_begin(). But
nothing really forces the range check.

By putting the range check into user_access_begin(), we actually force
people to do the right thing (tm), and the range check vill be visible
near the actual accesses. We have way too long a history of people
trying to avoid them.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ashwin H <ashwinh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/uaccess.h | 11 ++++++++++-
drivers/gpu/drm/i915/i915_gem_execbuffer.c | 15 +++++++++++++--
include/linux/uaccess.h | 2 +-
kernel/compat.c | 6 ++----
kernel/exit.c | 6 ++----
lib/strncpy_from_user.c | 9 +++++----
lib/strnlen_user.c | 9 +++++----
7 files changed, 38 insertions(+), 20 deletions(-)

--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -711,7 +711,16 @@ extern struct movsl_mask {
* checking before using them, but you have to surround them with the
* user_access_begin/end() pair.
*/
-#define user_access_begin() __uaccess_begin()
+static __must_check inline bool user_access_begin(const bool type,
+ const void __user *ptr,
+ size_t len)
+{
+ if (unlikely(!access_ok(type, ptr, len)))
+ return 0;
+ __uaccess_begin();
+ return 1;
+}
+#define user_access_begin(t, a, b) user_access_begin(t, a, b)
#define user_access_end() __uaccess_end()

#define unsafe_put_user(x, ptr, err_label) \
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -1604,7 +1604,9 @@ static int eb_copy_relocations(const str
* happened we would make the mistake of assuming that the
* relocations were valid.
*/
- user_access_begin();
+ if (!user_access_begin(VERIFY_WRITE, urelocs, size))
+ goto end_user;
+
for (copied = 0; copied < nreloc; copied++)
unsafe_put_user(-1,
&urelocs[copied].presumed_offset,
@@ -2649,7 +2651,16 @@ i915_gem_execbuffer2_ioctl(struct drm_de
unsigned int i;

/* Copy the new buffer offsets back to the user's exec list. */
- user_access_begin();
+ /*
+ * Note: count * sizeof(*user_exec_list) does not overflow,
+ * because we checked 'count' in check_buffer_count().
+ *
+ * And this range already got effectively checked earlier
+ * when we did the "copy_from_user()" above.
+ */
+ if (!user_access_begin(VERIFY_WRITE, user_exec_list, count * sizeof(*user_exec_list)))
+ goto end_user;
+
for (i = 0; i < args->buffer_count; i++) {
if (!(exec2_list[i].offset & UPDATE))
continue;
--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -267,7 +267,7 @@ extern long strncpy_from_unsafe(char *ds
probe_kernel_read(&retval, addr, sizeof(retval))

#ifndef user_access_begin
-#define user_access_begin() do { } while (0)
+#define user_access_begin(type, ptr, len) access_ok(type, ptr, len)
#define user_access_end() do { } while (0)
#define unsafe_get_user(x, ptr, err) do { if (unlikely(__get_user(x, ptr))) goto err; } while (0)
#define unsafe_put_user(x, ptr, err) do { if (unlikely(__put_user(x, ptr))) goto err; } while (0)
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -354,10 +354,9 @@ long compat_get_bitmap(unsigned long *ma
bitmap_size = ALIGN(bitmap_size, BITS_PER_COMPAT_LONG);
nr_compat_longs = BITS_TO_COMPAT_LONGS(bitmap_size);

- if (!access_ok(VERIFY_READ, umask, bitmap_size / 8))
+ if (!user_access_begin(VERIFY_READ, umask, bitmap_size / 8))
return -EFAULT;

- user_access_begin();
while (nr_compat_longs > 1) {
compat_ulong_t l1, l2;
unsafe_get_user(l1, umask++, Efault);
@@ -384,10 +383,9 @@ long compat_put_bitmap(compat_ulong_t __
bitmap_size = ALIGN(bitmap_size, BITS_PER_COMPAT_LONG);
nr_compat_longs = BITS_TO_COMPAT_LONGS(bitmap_size);

- if (!access_ok(VERIFY_WRITE, umask, bitmap_size / 8))
+ if (!user_access_begin(VERIFY_WRITE, umask, bitmap_size / 8))
return -EFAULT;

- user_access_begin();
while (nr_compat_longs > 1) {
unsigned long m = *mask++;
unsafe_put_user((compat_ulong_t)m, umask++, Efault);
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1617,10 +1617,9 @@ SYSCALL_DEFINE5(waitid, int, which, pid_
if (!infop)
return err;

- if (!access_ok(VERIFY_WRITE, infop, sizeof(*infop)))
+ if (!user_access_begin(VERIFY_WRITE, infop, sizeof(*infop)))
return -EFAULT;

- user_access_begin();
unsafe_put_user(signo, &infop->si_signo, Efault);
unsafe_put_user(0, &infop->si_errno, Efault);
unsafe_put_user(info.cause, &infop->si_code, Efault);
@@ -1745,10 +1744,9 @@ COMPAT_SYSCALL_DEFINE5(waitid,
if (!infop)
return err;

- if (!access_ok(VERIFY_WRITE, infop, sizeof(*infop)))
+ if (!user_access_begin(VERIFY_WRITE, infop, sizeof(*infop)))
return -EFAULT;

- user_access_begin();
unsafe_put_user(signo, &infop->si_signo, Efault);
unsafe_put_user(0, &infop->si_errno, Efault);
unsafe_put_user(info.cause, &infop->si_code, Efault);
--- a/lib/strncpy_from_user.c
+++ b/lib/strncpy_from_user.c
@@ -115,10 +115,11 @@ long strncpy_from_user(char *dst, const

kasan_check_write(dst, count);
check_object_size(dst, count, false);
- user_access_begin();
- retval = do_strncpy_from_user(dst, src, count, max);
- user_access_end();
- return retval;
+ if (user_access_begin(VERIFY_READ, src, max)) {
+ retval = do_strncpy_from_user(dst, src, count, max);
+ user_access_end();
+ return retval;
+ }
}
return -EFAULT;
}
--- a/lib/strnlen_user.c
+++ b/lib/strnlen_user.c
@@ -114,10 +114,11 @@ long strnlen_user(const char __user *str
unsigned long max = max_addr - src_addr;
long retval;

- user_access_begin();
- retval = do_strnlen_user(str, count, max);
- user_access_end();
- return retval;
+ if (user_access_begin(VERIFY_READ, str, max)) {
+ retval = do_strnlen_user(str, count, max);
+ user_access_end();
+ return retval;
+ }
}
return 0;
}

\
 
 \ /
  Last update: 2020-05-26 21:06    [W:0.291 / U:14.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site