lkml.org 
[lkml]   [2020]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] gpiolib: add GPIO_SET_DEBOUNCE_IOCTL
On Mon, May 25, 2020 at 4:22 AM Kent Gibson <warthog618@gmail.com> wrote:

> You mention timers for the gpio pins that cannot provide debounce,
> so I'm confused. Could you clarify which strategy you have in mind?

My idea is that the callback gpiod_set_debounce() for in-kernel consumers
should more or less always return success. Either the hardware does
the debounce, or gpiolib sets up a timer.

> I've also had a quick look at the possibility of providing the software
> debounce for in-kernel consumers.

That is where I think it should start.

> Are you anticipating new API for
> that? e.g. allowing consumers to request gpio events? Cos, gpio_keys
> grabs the irq itself - and that would bypass the software debouncer,
> or even conflict with it.

It may be hard or impossible.

I suppose gpiolib would have to steal or intercept the interrupt
by using e.g. IRQF_SHARED and then just return IRQ_HANDLED
on the first IRQ so the underlying irq handler does not get called.

After the timer times out it needs to retrigger the IRQ.

So the consuming driver would se a "debounced and ready"
IRQ so when it gets this IRQ it knows for sure there is
no bounciness on it because gpiolib already took care
of that.

The above is in no way trivial, but it follows the design pattern
of "narrow and deep" APIs.

Failure is an option! Sorry if I push too complex ideas.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2020-05-25 14:18    [W:0.075 / U:5.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site