lkml.org 
[lkml]   [2020]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/10] clk: qcom: gcc: remove unnecessary vco_table from SM8150
Date
The fixed alpha pll ops only use it for clamping in round_rate, which is
unnecessary. This is consistent with SM8250 GCC not using vco_table.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
drivers/clk/qcom/gcc-sm8150.c | 10 ----------
1 file changed, 10 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index 46dc67157eba..b14de0f35559 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -34,14 +34,8 @@ enum {
P_SLEEP_CLK,
};

-static const struct pll_vco trion_vco[] = {
- { 249600000, 2000000000, 0 },
-};
-
static struct clk_alpha_pll gpll0 = {
.offset = 0x0,
- .vco_table = trion_vco,
- .num_vco = ARRAY_SIZE(trion_vco),
.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
.clkr = {
.enable_reg = 0x52000,
@@ -85,8 +79,6 @@ static struct clk_alpha_pll_postdiv gpll0_out_even = {

static struct clk_alpha_pll gpll7 = {
.offset = 0x1a000,
- .vco_table = trion_vco,
- .num_vco = ARRAY_SIZE(trion_vco),
.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
.clkr = {
.enable_reg = 0x52000,
@@ -105,8 +97,6 @@ static struct clk_alpha_pll gpll7 = {

static struct clk_alpha_pll gpll9 = {
.offset = 0x1c000,
- .vco_table = trion_vco,
- .num_vco = ARRAY_SIZE(trion_vco),
.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
.clkr = {
.enable_reg = 0x52000,
--
2.26.1
\
 
 \ /
  Last update: 2020-05-24 23:06    [W:0.176 / U:7.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site