lkml.org 
[lkml]   [2020]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts
Date
Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.

Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
few changes. Notably, the HDK865 dts has regulator config changed a bit based
on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).

Jonathan Marek (6):
arm64: dts: qcom: sm8150: add apps_smmu node
arm64: dts: qcom: sm8250: add apps_smmu node
arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
arm64: dts: qcom: sm8250: Add USB and PHY device nodes
arm64: dts: qcom: add sm8150 hdk dts
arm64: dts: qcom: add sm8250 hdk dts

arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8150.dtsi | 180 +++++++++
arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8250.dtsi | 287 +++++++++++++++
5 files changed, 1384 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts

--
2.26.1

\
 
 \ /
  Last update: 2020-05-24 04:39    [W:0.251 / U:23.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site