lkml.org 
[lkml]   [2020]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v2 1/4] dt-bindings: net: Add tx and rx internal delays
On Fri, May 22, 2020 at 07:25:31AM -0500, Dan Murphy wrote:
> tx-internal-delays and rx-internal-delays are a common setting for RGMII
> capable devices.
>
> These properties are used when the phy-mode or phy-controller is set to
> rgmii-id, rgmii-rxid or rgmii-txid. These modes indicate to the
> controller that the PHY will add the internal delay for the connection.
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>
> v2 - updated to add -ps
>
> .../bindings/net/ethernet-controller.yaml | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> index ac471b60ed6a..70702a4ef5e8 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> @@ -143,6 +143,20 @@ properties:
> Specifies the PHY management type. If auto is set and fixed-link
> is not specified, it uses MDIO for management.
>
> + rx-internal-delay-ps:
> + $ref: /schemas/types.yaml#definitions/uint32
> + description: |
> + RGMII Receive PHY Clock Delay defined in pico seconds. This is used for
> + PHY's that have configurable RX internal delays. This property is only
> + used when the phy-mode or phy-connection-type is rgmii-id or rgmii-rxid.

Hi Dan

Please add a comment about rounding to the nearest supported value.

Andrew

\
 
 \ /
  Last update: 2020-05-23 17:14    [W:0.078 / U:1.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site