lkml.org 
[lkml]   [2020]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 02/20] spi: spi-mem: allow specifying a command's extension
On Fri, 22 May 2020 15:42:43 +0530
Pratyush Yadav <p.yadav@ti.com> wrote:

> In xSPI mode, flashes expect 2-byte opcodes. The second byte is called
> the "command extension". There can be 3 types of extensions in xSPI:
> repeat, invert, and hex. When the extension type is "repeat", the same
> opcode is sent twice. When it is "invert", the second byte is the
> inverse of the opcode. When it is "hex" an additional opcode byte based
> is sent with the command whose value can be anything.
>
> So, make opcode a 16-bit value and add a 'nbytes', similar to how
> multiple address widths are handled.

A slightly different version of patch 5 should go before this patch,
otherwise your series is not bisectable. By slightly different, I mean
that you should only write one byte, but put this byte in a temporary
var. Or maybe you can squash patch 5 in this one and mention why you do
so in your commit message.

>
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
> ---
> drivers/spi/spi-mem.c | 5 ++++-
> include/linux/spi/spi-mem.h | 6 +++++-
> 2 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
> index 93e255287ab9..29dcd1d62710 100644
> --- a/drivers/spi/spi-mem.c
> +++ b/drivers/spi/spi-mem.c
> @@ -159,6 +159,9 @@ bool spi_mem_default_supports_op(struct spi_mem *mem,
> if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
> return false;
>
> + if (op->cmd.nbytes != 1)
> + return false;
> +
> return true;
> }
> EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
> @@ -173,7 +176,7 @@ static bool spi_mem_buswidth_is_valid(u8 buswidth)
>
> static int spi_mem_check_op(const struct spi_mem_op *op)
> {
> - if (!op->cmd.buswidth)
> + if (!op->cmd.buswidth || !op->cmd.nbytes)
> return -EINVAL;
>
> if ((op->addr.nbytes && !op->addr.buswidth) ||
> diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
> index e3dcb956bf61..159463cc659c 100644
> --- a/include/linux/spi/spi-mem.h
> +++ b/include/linux/spi/spi-mem.h
> @@ -17,6 +17,7 @@
> { \
> .buswidth = __buswidth, \
> .opcode = __opcode, \
> + .nbytes = 1, \
> }
>
> #define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth) \
> @@ -69,6 +70,8 @@ enum spi_mem_data_dir {
>
> /**
> * struct spi_mem_op - describes a SPI memory operation
> + * @cmd.nbytes: number of opcode bytes (only 1 or 2 are valid). The opcode is
> + * sent MSB-first.
> * @cmd.buswidth: number of IO lines used to transmit the command
> * @cmd.opcode: operation opcode
> * @cmd.dtr: whether the command opcode should be sent in DTR mode or not
> @@ -94,9 +97,10 @@ enum spi_mem_data_dir {
> */
> struct spi_mem_op {
> struct {
> + u8 nbytes;
> u8 buswidth;
> u8 dtr : 1;
> - u8 opcode;
> + u16 opcode;
> } cmd;
>
> struct {

\
 
 \ /
  Last update: 2020-05-22 17:33    [W:0.096 / U:5.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site