lkml.org 
[lkml]   [2020]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 11/11] ARM64: dts: mediatek: enable ethernet on pumpkin boards
Date
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add remaining properties to the ethernet node and enable it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
.../boot/dts/mediatek/pumpkin-common.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 4b1d5f69aba6..dfceffe6950a 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -167,6 +167,24 @@ &uart0 {
status = "okay";
};

+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ethernet_pins_default>;
+ phy-handle = <&eth_phy>;
+ phy-mode = "rmii";
+ mac-address = [00 00 00 00 00 00];
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
&usb0 {
status = "okay";
dr_mode = "peripheral";
--
2.25.0
\
 
 \ /
  Last update: 2020-05-22 14:08    [W:0.194 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site