lkml.org 
[lkml]   [2020]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v13 0/3] i2c: npcm7xx: add NPCM i2c controller driver
Date
This patch set adds i2c controller support 
for the Nuvoton NPCM Baseboard Management Controller (BMC).

NPCM7xx includes 16 I2C controllers. This driver operates the controller.
This module also includes a slave mode.

---
v13 -> v12:
- Fix yaml example. Issue found by an updated dt_binding_check.
- remove double spacing. indentation issues.
- remove ifdef DEBUG_FS around __init and __exit.
- debugfs and counters are always present in bus struct.
- Fix npcm_i2c_write_fifo_slave flow.
- Remove version number.
v12 -> v11:
- Fix according to maintainer comments.
- debugfs simplified (usedebugfs_create_u64).
- slave read fifo split from master read fifo.
v11 -> v10:
- Fix according to maintainer comments.
- Init clk simplified.
- Comments in c99
- Split master irq function.
- debugfs not mandatory.
- yaml file fix.

v10 -> v9:
- Fix according to maintainer comments.
- binding file changed to yaml format.
- Shorten recovery flow.
- Add support for health monitoring counters.

v9 -> v8:
- Fix according to maintainer comments.
- Split lines of iowrite..(ioread..) to separate lines.
- Use readx_poll_timeout_atomic
- resolve various style issues.

v8 -> v7:
- Split to two commits, one for master, one for slave.
- Rename smb to i2c.
- Remove global vars.

v7 -> v6:
- Rebased on Linux 5.4-rc8 (was Linux 5.4-rc7).
- Fix issue found by kbuild test robot (redundant include).
- Note: left a warning related to fall through. This fall through is
intentional.

v6 -> v5:
- Update documentation

v5 -> v4:
- support recovery
- master-slave switch support needed for IPMB

v4 -> v3:
- typo on cover letter.

v3 -> v2:
- fix dt binding: compatible name: omit "bus"

v2 -> v1:
- run check patch in strict mode.
- use linux crc.
- define regs in constant offset without base.
- remove debug prints.
- no declarations for local functions.

v1: initial version

Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

---
Tali Perry (3):
dt-bindings: i2c: npcm7xx: add NPCM I2C controller documentation
i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
i2c: npcm7xx: Add support for slave mode for Nuvoton NPCM BMC I2C
controller driver.

.../bindings/i2c/nuvoton,npcm7xx-i2c.yaml | 60 +
drivers/i2c/busses/Kconfig | 9 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-npcm7xx.c | 2411 +++++++++++++++++
4 files changed, 2481 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
create mode 100644 drivers/i2c/busses/i2c-npcm7xx.c


base-commit: b9bbe6ed63b2b9f2c9ee5cbd0f2c946a2723f4ce
--
2.22.0

\
 
 \ /
  Last update: 2020-05-22 13:37    [W:0.070 / U:6.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site