lkml.org 
[lkml]   [2020]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: Panic related to perf (bisected)
On Thu, May 21, 2020 at 10:14 PM Tibor Billes <tbilles@gmx.com> wrote:
>
> Hi,
>
> On Mon, 18 May 2020, Ian Rogers wrote:
>
> > On Sat, May 16, 2020 at 6:36 AM Billes Tibor <tbilles@gmx.com> wrote:
> > >
> > > Hi,
> > >
> > > I've been hitting a freeze on my laptop since 5.3, but haven't got the
> > > time to finish bisecting it. Now
> > > I had, and here is what I found:
> > >
> > > - 5.2 series works correctly (tested 5.2.9 and 5.2.15)
> > > - 5.3 series and newer kernels freeze. The newest I tested is 5.6.10
> > > (which also freezes). There will
> > > be a complete bisect log at the end of the mail.
> > >
> > > There are several circumstances to reproduce the freeze. At least this
> > > is what I found relevant:
> > > - The freeze does not occur after a fresh boot, it needs a sleep-wakeup
> > > cycle.
> > > - Run `perf stat -a --topdown -- sleep 8s` every minute (It is part of
> > > some metrics I collect using Zabbix)
> > > - Some workload (building the kernel or gaming) increases the chance of
> > > freezing, but it can occur
> > > without user interaction too.
> > >
> > > The freeze usually comes within a few minutes after wakeup. The longest
> > > was about an hour. (For
> > > comparison, if I don't do a sleep-wakeup, the machine works fine for 8+
> > > hours).
> > >
> > > First, there is a warning in syslog, then I took pictures of the actual
> > > panic.
> > >
> > > The warning:
> > > May 16 13:28:46 serpens kernel: [33128.086217] ------------[ cut here
> > > ]------------
> > > May 16 13:28:46 serpens kernel: [33128.086222] WARNING: CPU: 0 PID: 0 at
> > > arch/x86/events/core.c:1506 x86_pmu_del+0x140/0x160
> > > May 16 13:28:46 serpens kernel: [33128.086223] Modules linked in:
> > > nouveau mxm_wmi ttm ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc
> > > iptable_filter binfmt_misc essiv authenc uvcvideo iwlmvm
> > > videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videodev mac80211
> > > videobuf2_common snd_hda_codec_realtek snd_hda_codec_generic libarc4
> > > snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep intel_rapl_msr
> > > iwlwifi snd_hda_core intel_rapl_common snd_pcm x86_pkg_temp_thermal
> > > snd_seq mei_me cfg80211 snd_seq_device snd_timer mei intel_powerclamp
> > > snd soundcore ideapad_laptop coretemp sparse_keymap ip_tables x_tables
> > > dm_crypt hid_generic usbhid hid i915 intel_gtt i2c_algo_bit
> > > drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm
> > > aesni_intel glue_helper crypto_simd r8169 ahci cryptd psmouse libahci
> > > realtek drm_panel_orientation_quirks video wmi
> > > May 16 13:28:46 serpens kernel: [33128.086247] CPU: 0 PID: 0 Comm:
> > > swapper/0 Not tainted 5.6.10 #52
> > > May 16 13:28:46 serpens kernel: [33128.086247] Hardware name: LENOVO
> > > 20378/Lenovo Y50-70, BIOS 9ECN36WW(V2.00) 01/12/2015
> > > May 16 13:28:46 serpens kernel: [33128.086249] RIP:
> > > 0010:x86_pmu_del+0x140/0x160
> > > May 16 13:28:46 serpens kernel: [33128.086250] Code: 63 d8 48 c7 84 dd
> > > 20 07 00 00 00 00 00 00 4c 89 e7 89 85 14 02 00 00 e8 fe 27 16 00 e9 ef
> > > fe ff ff 44 8d 6b 01 e9 5d ff ff ff <0f> 0b 5b 5d 41 5c 41 5d c3 31 db
> > > e9 41 ff ff ff 41 bd 01 00 00 00
> > > May 16 13:28:46 serpens kernel: [33128.086251] RSP:
> > > 0018:ffffa2a380003e40 EFLAGS: 00010046
> > > May 16 13:28:46 serpens kernel: [33128.086252] RAX: 0000000000000005
> > > RBX: 0000000000000005 RCX: 0000000000000010
> > > May 16 13:28:46 serpens kernel: [33128.086253] RDX: 0000000000000005
> > > RSI: 0000000000000005 RDI: ffff907c4d4b1000
> > > May 16 13:28:46 serpens kernel: [33128.086254] RBP: ffff907d932125a0
> > > R08: 0000000000000002 R09: 0000000000029f80
> > > May 16 13:28:46 serpens kernel: [33128.086254] R10: ffffa2a380003eb0
> > > R11: 0000000000000000 R12: ffff907c4d4b1000
> > > May 16 13:28:46 serpens kernel: [33128.086255] R13: 0000000000000006
> > > R14: ffff907d9326fc0c R15: ffff907d9326fb00
> > > May 16 13:28:46 serpens kernel: [33128.086256] FS:
> > > 0000000000000000(0000) GS:ffff907d93200000(0000) knlGS:0000000000000000
> > > May 16 13:28:46 serpens kernel: [33128.086256] CS: 0010 DS: 0000 ES:
> > > 0000 CR0: 0000000080050033
> > > May 16 13:28:46 serpens kernel: [33128.086257] CR2: 00007f713c5b44b0
> > > CR3: 000000008300a001 CR4: 00000000001606f0
> > > May 16 13:28:46 serpens kernel: [33128.086257] Call Trace:
> > > May 16 13:28:46 serpens kernel: [33128.086259] <IRQ>
> > > May 16 13:28:46 serpens kernel: [33128.086263]
> > > event_sched_out.isra.116+0x89/0x1f0
> > > May 16 13:28:46 serpens kernel: [33128.086264]
> > > group_sched_out.part.118+0x55/0xd0
> > > May 16 13:28:46 serpens kernel: [33128.086265] ctx_sched_out+0x207/0x240
> > > May 16 13:28:46 serpens kernel: [33128.086267]
> > > perf_mux_hrtimer_handler+0x267/0x310
> > > May 16 13:28:46 serpens kernel: [33128.086269] ?
> > > __perf_install_in_context+0x220/0x220
> > > May 16 13:28:46 serpens kernel: [33128.086270]
> > > __hrtimer_run_queues+0xfa/0x260
> > > May 16 13:28:46 serpens kernel: [33128.086272] hrtimer_interrupt+0xe5/0x240
> > > May 16 13:28:46 serpens kernel: [33128.086275] ?
> > > recalibrate_cpu_khz+0x10/0x10
> > > May 16 13:28:46 serpens kernel: [33128.086278]
> > > smp_apic_timer_interrupt+0x62/0x120
> > > May 16 13:28:46 serpens kernel: [33128.086280] apic_timer_interrupt+0xf/0x20
> > > May 16 13:28:46 serpens kernel: [33128.086281] </IRQ>
> > > May 16 13:28:46 serpens kernel: [33128.086284] RIP:
> > > 0010:cpuidle_enter_state+0xb6/0x3f0
> > > May 16 13:28:46 serpens kernel: [33128.086285] Code: c4 0f 1f 44 00 00
> > > 31 ff e8 d7 bf a9 ff 80 7c 24 0b 00 74 12 9c 58 f6 c4 02 0f 85 12 03 00
> > > 00 31 ff e8 0e 74 af ff fb 45 85 ed <0f> 88 ad 02 00 00 49 63 c5 4c 2b
> > > 24 24 48 8d 14 40 48 8d 14 90 48
> > > May 16 13:28:46 serpens kernel: [33128.086285] RSP:
> > > 0018:ffffffffb5003e58 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13
> > > May 16 13:28:46 serpens kernel: [33128.086286] RAX: ffff907d9322a700
> > > RBX: ffff907d93232c00 RCX: 000000000000001f
> > > May 16 13:28:46 serpens kernel: [33128.086287] RDX: 00001e213bcf5a93
> > > RSI: 0000000033518eeb RDI: 0000000000000000
> > > May 16 13:28:46 serpens kernel: [33128.086288] RBP: ffffffffb50be6a0
> > > R08: 0000000000000002 R09: 0000000000029f80
> > > May 16 13:28:46 serpens kernel: [33128.086288] R10: ffffffffb5003e40
> > > R11: 000000000000004c R12: 00001e213bcf5a93
> > > May 16 13:28:46 serpens kernel: [33128.086289] R13: 0000000000000001
> > > R14: 0000000000000001 R15: ffffffffffffffff
> > > May 16 13:28:46 serpens kernel: [33128.086291] ?
> > > cpuidle_enter_state+0x99/0x3f0
> > > May 16 13:28:46 serpens kernel: [33128.086292] cpuidle_enter+0x29/0x40
> > > May 16 13:28:46 serpens kernel: [33128.086295] do_idle+0x1ff/0x270
> > > May 16 13:28:46 serpens kernel: [33128.086296] cpu_startup_entry+0x19/0x20
> > > May 16 13:28:46 serpens kernel: [33128.086299] start_kernel+0x4a6/0x4b3
> > > May 16 13:28:46 serpens kernel: [33128.086302]
> > > secondary_startup_64+0xa4/0xb0
> > > May 16 13:28:46 serpens kernel: [33128.086303] ---[ end trace
> > > 6d25af1bc8d0e9ca ]---
> > >
> > > Here are the photos of the panic: https://postimg.cc/gallery/Ywm0Ywd
> > > (Same panic, just taken
> > > multiple photos to be readable).
> > >
> > > Here is another photo of a panic from another machine:
> > > https://i.postimg.cc/d00s8Ncb/DSC-0395.jpg
> > > Same setup regarding perf stat -a and the sleep-wakeup, but can't
> > > remember the exact kernel
> > > version I was running.
> > >
> > > I tried reverting fd7d55172d1e2e501e6da0a5c1de25f06612dc2e which is the
> > > first bad commit
> > > according to my bisect, but there were conflicts, and I'm not a kernel
> > > developer, I couldn't resolve
> > > them.
> >
> > The bisect shows bad and good alongside each other and so isn't
> > categorically pointing at that change, which should be benign with
> > your command lines given cgroup profiling isn't used.
>
> I was under the impression this is how bisect works, good and bad
> revisions progress as the binary search tries to pick commits in the
> middle and sometimes it is before, and sometime it is after the commit in
> question. Given the above I don't understand what you mean by 'so isn't
> categorically pointing at that change'. Could you please explain? Is
> there a way for me to do a more precise bisect? Are there any related
> DEBUG configs to enable extra asserts?

Sorry for misreading. I'm not aware of any asserts.

Thanks,
Ian

> > There were
> > related fixes, such as 7fa343b7fdc4f351de4e3f28d5c285937dd1f42f and
> > 90c91dfb86d0ff545bd329d3ddd72c147e2ae198 but neither mention panics.
> > The crash is happening in the PMU code rather than the generic perf
> > handling, so maybe that is at issue?
>
> Thanks for clarifying some details!
>
> Tibor
>
> >
> > Sorry to not have a fix for your problem,
> > Ian
> >
> > > Bisect log:
> > >
> > > git bisect start
> > > # bad: [70c707aae3e586f6ebc677ad733a9c3cea32f7ac] Linux 5.5.1
> > > git bisect bad 70c707aae3e586f6ebc677ad733a9c3cea32f7ac
> > > # good: [aad39e30fb9e6e7212318a1dad898f36f1075648] Linux 5.2.9
> > > git bisect good aad39e30fb9e6e7212318a1dad898f36f1075648
> > > # good: [0ecfebd2b52404ae0c54a878c872bb93363ada36] Linux 5.2
> > > git bisect good 0ecfebd2b52404ae0c54a878c872bb93363ada36
> > > # bad: [3c30819dc68ab9498216421b6846123900c0a6d3] Merge
> > > git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
> > > git bisect bad 3c30819dc68ab9498216421b6846123900c0a6d3
> > > # bad: [d9b9c893048e9d308a833619f0866f1f52778cf5] Merge tag
> > > 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client
> > > git bisect bad d9b9c893048e9d308a833619f0866f1f52778cf5
> > > # bad: [db0457338ece7482378d88e50ad298191c3e6947] Merge branch
> > > 'for-linus' of
> > > git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
> > > git bisect bad db0457338ece7482378d88e50ad298191c3e6947
> > > # bad: [608745f12462e2d8d94d5cc5dc94bf0960a881e3] Merge branch
> > > 'perf-core-for-linus' of
> > > git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
> > > git bisect bad 608745f12462e2d8d94d5cc5dc94bf0960a881e3
> > > # good: [947fbd4ca9fb38f320b076e68cfccab977c5ea01] Merge tag
> > > 'please-pull-for_5.3' of
> > > git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
> > > git bisect good 947fbd4ca9fb38f320b076e68cfccab977c5ea01
> > > # good: [0dcb4efb1095d0a1f5f681c2b94e98b009cc5d77] ALSA: firewire-lib:
> > > code refactoring for local variables
> > > git bisect good 0dcb4efb1095d0a1f5f681c2b94e98b009cc5d77
> > > # good: [cf2d213e49fdf47e4c10dc629a3659e0026a54b8] Merge tag
> > > 'pm-5.3-rc1' of
> > > git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
> > > git bisect good cf2d213e49fdf47e4c10dc629a3659e0026a54b8
> > > # bad: [fe96245c7f38c4ea92c1c599b43f176e27d9921e] perf hists: Add
> > > block_info in hist_entry
> > > git bisect bad fe96245c7f38c4ea92c1c599b43f176e27d9921e
> > > # good: [87407fa58b6645cecd24102f58476b8dd7ce778d] perf config: Update
> > > default value for llvm.clang-bpf-cmd-template
> > > git bisect good 87407fa58b6645cecd24102f58476b8dd7ce778d
> > > # skip: [78d6ccce03e86de34c7000bcada493ed0679e350] perf build: Handle
> > > slang being in /usr/include and in /usr/include/slang/
> > > git bisect skip 78d6ccce03e86de34c7000bcada493ed0679e350
> > > # good: [b9271f0c65e12efd9b6319f57a378aac1be98b22] Merge tag 'v5.2-rc6'
> > > into perf/core, to refresh branch
> > > git bisect good b9271f0c65e12efd9b6319f57a378aac1be98b22
> > > # good: [203dffacf592317e54480704f569a09f8b7ca380] Documentation/ABI:
> > > Document umwait control sysfs interfaces
> > > git bisect good 203dffacf592317e54480704f569a09f8b7ca380
> > > # bad: [cf8b6970f4fc31898f3d9e25159aa57e235ca4d1] perf symbols: We need
> > > util.h in symbol-elf.c for zfree()
> > > git bisect bad cf8b6970f4fc31898f3d9e25159aa57e235ca4d1
> > > # bad: [9f94c7f947e919c343b30f080285af53d0fa9902] perf tools: Increase
> > > MAX_NR_CPUS and MAX_CACHES
> > > git bisect bad 9f94c7f947e919c343b30f080285af53d0fa9902
> > > # good: [122f1c51b11a9e572263c4965d772381fcef06c5] perf/x86/rapl: Get
> > > MSR values from new probe framework
> > > git bisect good 122f1c51b11a9e572263c4965d772381fcef06c5
> > > # bad: [2d7102a0453769fd37e9f4ce68652e104fbf5c84] perf tools: Fix
> > > cache.h include directive
> > > git bisect bad 2d7102a0453769fd37e9f4ce68652e104fbf5c84
> > > # good: [637d97b53cdded02da55d0a25cda6fd6af3bd042] perf/x86/rapl: Get
> > > quirk state from new probe framework
> > > git bisect good 637d97b53cdded02da55d0a25cda6fd6af3bd042
> > > # bad: [fd7d55172d1e2e501e6da0a5c1de25f06612dc2e] perf/cgroups: Don't
> > > rotate events for cgroups unnecessarily
> > > git bisect bad fd7d55172d1e2e501e6da0a5c1de25f06612dc2e
> > > # first bad commit: [fd7d55172d1e2e501e6da0a5c1de25f06612dc2e]
> > > perf/cgroups: Don't rotate events for cgroups unnecessarily
> > >
> > > Is there any more information that I can gather to make this issue
> > > easier to fix?
> > >
> > > Thanks,
> > > Tibor Billes
> >

\
 
 \ /
  Last update: 2020-05-22 07:23    [W:0.076 / U:2.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site