lkml.org 
[lkml]   [2020]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCHv2 2/2] tpm_ftpm_tee: register driver on TEE bus
On Fri, 22 May 2020 at 20:15, Jarkko Sakkinen
<jarkko.sakkinen@linux.intel.com> wrote:
>
> On Thu, May 21, 2020 at 09:47:43AM +0300, Maxim Uvarov wrote:
> > Register driver on TEE bus. module tee registers bus,
>
> "on the TEE bus"
>
> "The module tee"
>
> > and module optee calls optee_enumerate_devices() to scan
> > all devices on the bus. Trusted Application for this driver
>
> Looking at drivers/tee, it shows that tee and optee are in fact the same
> module as opposed to what your commit message says.
>

In the current kernel it's 2 different modules.

> > can be Early TA's (can be compiled into optee-os). In that
> > case it will be on OPTEE bus before linux booting. Also
> > optee-suplicant application is needed to be loaded between
> > OPTEE module and ftpm module to maintain functionality
> > for fTPM driver.
>
> Why is this needed and why things worked before having this?
>

Before these changes user space has to drive boot sequence. I.e. tee
and optee modules loads, then application tee-supplicant has to start
and only then module ftpm can be loaded. The reason for that is
storage services are implemented in userspace and driver needs them.
To make it work needed some tricky systemd scenario with black list
driver mode. That really did not look well. From the over side ftpm
might be used by uboot so it can be compiled inside firmware
(bl32/optee-os). On the other hand there are drivers like tee-rng
which do not need tee-supplicant and can run immediately after tee and
optee modules. So the solution as I described in the commit is to make
tee bus work for both types of drivers.

Also in this driver I specially did not remove the old way of
registration using DT entry. To not break existence things. And added
new registration from the platform driver.


> > Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
> > Suggested-by: Sumit Garg <sumit.garg@linaro.org>
> > Suggested-by: Arnd Bergmann <arnd@linaro.org>
> > ---
> > drivers/char/tpm/tpm_ftpm_tee.c | 69 ++++++++++++++++++++++++++++-----
> > 1 file changed, 59 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_ftpm_tee.c b/drivers/char/tpm/tpm_ftpm_tee.c
> > index 22bf553ccf9d..7bb4ce281050 100644
> > --- a/drivers/char/tpm/tpm_ftpm_tee.c
> > +++ b/drivers/char/tpm/tpm_ftpm_tee.c
> > @@ -214,11 +214,10 @@ static int ftpm_tee_match(struct tee_ioctl_version_data *ver, const void *data)
> > * Return:
> > * On success, 0. On failure, -errno.
> > */
> > -static int ftpm_tee_probe(struct platform_device *pdev)
> > +static int ftpm_tee_probe(struct device *dev)
> > {
> > int rc;
> > struct tpm_chip *chip;
> > - struct device *dev = &pdev->dev;
> > struct ftpm_tee_private *pvt_data = NULL;
> > struct tee_ioctl_open_session_arg sess_arg;
> >
> > @@ -297,6 +296,13 @@ static int ftpm_tee_probe(struct platform_device *pdev)
> > return rc;
> > }
> >
> > +static int ftpm_plat_tee_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > +
> > + return ftpm_tee_probe(dev);
> > +}
> > +
> > /**
> > * ftpm_tee_remove() - remove the TPM device
> > * @pdev: the platform_device description.
> > @@ -304,9 +310,9 @@ static int ftpm_tee_probe(struct platform_device *pdev)
> > * Return:
> > * 0 always.
> > */
> > -static int ftpm_tee_remove(struct platform_device *pdev)
> > +static int ftpm_tee_remove(struct device *dev)
> > {
> > - struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
> > + struct ftpm_tee_private *pvt_data = dev_get_drvdata(dev);
> >
> > /* Release the chip */
> > tpm_chip_unregister(pvt_data->chip);
> > @@ -328,11 +334,18 @@ static int ftpm_tee_remove(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static int ftpm_plat_tee_remove(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > +
> > + return ftpm_tee_remove(dev);
> > +}
> > +
> > /**
> > * ftpm_tee_shutdown() - shutdown the TPM device
> > * @pdev: the platform_device description.
> > */
> > -static void ftpm_tee_shutdown(struct platform_device *pdev)
> > +static void ftpm_plat_tee_shutdown(struct platform_device *pdev)
> > {
> > struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
> >
> > @@ -347,17 +360,53 @@ static const struct of_device_id of_ftpm_tee_ids[] = {
> > };
> > MODULE_DEVICE_TABLE(of, of_ftpm_tee_ids);
> >
> > -static struct platform_driver ftpm_tee_driver = {
> > +static struct platform_driver ftpm_tee_plat_driver = {
> > .driver = {
> > .name = "ftpm-tee",
> > .of_match_table = of_match_ptr(of_ftpm_tee_ids),
> > },
> > - .probe = ftpm_tee_probe,
> > - .remove = ftpm_tee_remove,
> > - .shutdown = ftpm_tee_shutdown,
> > + .shutdown = ftpm_plat_tee_shutdown,
> > + .probe = ftpm_plat_tee_probe,
> > + .remove = ftpm_plat_tee_remove,
> > +};
> > +
> > +static const struct tee_client_device_id optee_ftpm_id_table[] = {
> > + {UUID_INIT(0xbc50d971, 0xd4c9, 0x42c4,
> > + 0x82, 0xcb, 0x34, 0x3f, 0xb7, 0xf3, 0x78, 0x96)},
> > + {}
>
> Please put a comment describing what this is.
>
> > };
> >
> > -module_platform_driver(ftpm_tee_driver);
> > +MODULE_DEVICE_TABLE(tee, optee_ftpm_id_table);
> > +
> > +static struct tee_client_driver ftpm_tee_driver = {
> > + .id_table = optee_ftpm_id_table,
> > + .driver = {
> > + .name = "optee-ftpm",
> > + .bus = &tee_bus_type,
> > + .probe = ftpm_tee_probe,
> > + .remove = ftpm_tee_remove,
> > + },
> > +};
> > +
> > +static int __init ftpm_mod_init(void)
> > +{
> > + int rc;
> > +
> > + rc = platform_driver_register(&ftpm_tee_plat_driver);
> > + if (rc)
> > + return rc;
> > +
> > + return driver_register(&ftpm_tee_driver.driver);
> > +}
> > +
> > +static void __exit ftpm_mod_exit(void)
> > +{
> > + platform_driver_unregister(&ftpm_tee_plat_driver);
> > + driver_unregister(&ftpm_tee_driver.driver);
> > +}
> > +
> > +module_init(ftpm_mod_init);
> > +module_exit(ftpm_mod_exit);
> >
> > MODULE_AUTHOR("Thirupathaiah Annapureddy <thiruan@microsoft.com>");
> > MODULE_DESCRIPTION("TPM Driver for fTPM TA in TEE");
> > --
> > 2.17.1
> >
>
> Wondering if MODULE_AUTHOR() is still equired given that the GIT log
> has objectively better log of authorship.
>
> /Jarkko

Yea, but I prefer to not touch such lines. It's up to maintainers how
they support the driver.

Best regards,
Maxim.

\
 
 \ /
  Last update: 2020-05-22 21:31    [W:0.094 / U:4.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site