lkml.org 
[lkml]   [2020]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [v4,0/7] Add Mediatek thermal dirver and dtsi
From
Date
On Thu, 2020-05-21 at 14:51 +0200, Matthias Brugger wrote:
> Hi Michael,
>
> On 23/03/2020 13:15, Michael Kao wrote:
> > This patchset supports for MT8183 chip to mtk_thermal.c.
> > Add thermal zone of all the thermal sensor in SoC for
> > another get temperatrue. They don't need to thermal throttle.
> > And we bind coolers for thermal zone nodes of cpu_thermal.
> >
> > Rebase to kernel-5.6-rc1.
> >
> > Update content:
> >
> > [1/7]
> > - Squash thermal zone settings in the dtsi from [v3,5/8]
> > arm64: dts: mt8183: Increase polling frequency for CPU thermal zone
> >
> > - Remove the property of interrupts and mediatek,hw-reset-temp
> >
> > [2/7]
> > - Correct commit message
> >
> > [4/7]
> > - Change the target temperature to the 80C and change the commit message
> >
> > [6/7]
> > - Adjust newline alignment
> >
> > - Fix the judgement on the return value of registering thermal zone
> >
> > This patch series base on these patches [1].
> >
> > [v7,3/3] PM / AVS: SVS: Introduce SVS engine (https://patchwork.kernel.org/patch/11439829/)
> >
> > Matthias Kaehlcke (1):
> > arm64: dts: mt8183: Configure CPU cooling
> >
> > Michael Kao (6):
> > arm64: dts: mt8183: add thermal zone node
> > arm64: dts: mt8183: add dynamic power coefficients
> > arm64: dts: mt8183: Add #cooling-cells to CPU nodes
> > thermal: mediatek: mt8183: fix bank number settings
>
> Do I understand correctly that we need to fix the bank number before we can add
> the device tree changes. And that the last two patches are enhancements for the
> driver but needed to get a working version?
>
> Regards,
> Matthias

Hi Matthias,

There is one bank setting of mt8183 config.
If the device tree merged first. I worry that it will crash when the
thermal zone read temperature.
It will access the invalid index of bank.
So please add the patch "fix bank number settings "
first.222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222

>
> > thermal: mediatek: add another get_temp ops for thermal sensors
> > thermal: mediatek: use spinlock to protect PTPCORESEL
> >
> > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 156 +++++++++++++++++++++++
> > drivers/thermal/mtk_thermal.c | 88 +++++++++++--
> > 2 files changed, 231 insertions(+), 13 deletions(-)
> >

\
 
 \ /
  Last update: 2020-05-22 06:09    [W:0.039 / U:1.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site