lkml.org 
[lkml]   [2020]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv3 5/5] Input: EXC3000: Add reset gpio support
From
Date
Hi Sebastian,

On 20/5/20 17:39, Sebastian Reichel wrote:
> Add basic support for an optional reset gpio.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Thanks to address the comments I did in second version. so,

Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

> ---
> .../input/touchscreen/eeti,exc3000.yaml | 2 ++
> drivers/input/touchscreen/exc3000.c | 17 +++++++++++++++++
> 2 files changed, 19 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
> index 7e6e23f8fa00..007adbc89c14 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
> +++ b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
> @@ -22,6 +22,8 @@ properties:
> const: 0x2a
> interrupts:
> maxItems: 1
> + reset-gpios:
> + maxItems: 1
> touchscreen-size-x: true
> touchscreen-size-y: true
> touchscreen-inverted-x: true
> diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
> index b5a3bbb63504..de9d0ae1210a 100644
> --- a/drivers/input/touchscreen/exc3000.c
> +++ b/drivers/input/touchscreen/exc3000.c
> @@ -8,7 +8,9 @@
> */
>
> #include <linux/bitops.h>
> +#include <linux/delay.h>
> #include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/input.h>
> #include <linux/input/mt.h>
> @@ -33,6 +35,9 @@
>
> #define EXC3000_TIMEOUT_MS 100
>
> +#define EXC3000_RESET_MS 10
> +#define EXC3000_READY_MS 100
> +
> static const struct i2c_device_id exc3000_id[];
>
> struct eeti_dev_info {
> @@ -66,6 +71,7 @@ struct exc3000_data {
> const struct eeti_dev_info *info;
> struct input_dev *input;
> struct touchscreen_properties prop;
> + struct gpio_desc *reset;
> struct timer_list timer;
> u8 buf[2 * EXC3000_LEN_FRAME];
> struct completion wait_event;
> @@ -325,6 +331,17 @@ static int exc3000_probe(struct i2c_client *client)
> init_completion(&data->wait_event);
> mutex_init(&data->query_lock);
>
> + data->reset = devm_gpiod_get_optional(&client->dev, "reset",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(data->reset))
> + return PTR_ERR(data->reset);
> +
> + if (data->reset) {
> + msleep(EXC3000_RESET_MS);
> + gpiod_set_value_cansleep(data->reset, 0);
> + msleep(EXC3000_READY_MS);
> + }
> +
> input = devm_input_allocate_device(&client->dev);
> if (!input)
> return -ENOMEM;
>

\
 
 \ /
  Last update: 2020-05-20 18:56    [W:0.082 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site