lkml.org 
[lkml]   [2020]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/5] EDAC/ghes: Have a separate code path for creating the fake MC
Date
The code in ghes_edac_register() switches back and forth between
standard and fake controller creation. Do one thing only and separate
the code path that creates the fake MC.

Note: For better review the code is not yet carved out in separate
functions.

Signed-off-by: Robert Richter <rrichter@marvell.com>
---
drivers/edac/ghes_edac.c | 73 +++++++++++++++++++++++++---------------
1 file changed, 46 insertions(+), 27 deletions(-)

diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
index 8329af037fbe..47b99e0fea6d 100644
--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -536,7 +536,6 @@ int ghes_edac_register(struct ghes *ghes, struct device *dev)
struct dimm_fill dimm_fill;
int rc = 0, num_dimm = 0;
struct mem_ctl_info *mci;
- bool fake = false;
int idx;

if (IS_ENABLED(CONFIG_X86)) {
@@ -560,24 +559,44 @@ int ghes_edac_register(struct ghes *ghes, struct device *dev)
/* Get the number of DIMMs */
dmi_walk(ghes_edac_count_dimms, &num_dimm);

- /* Check if we've got a bogus BIOS */
- if (num_dimm == 0) {
- fake = true;
- num_dimm = 1;
- }
+ if (!num_dimm) {
+ /*
+ * Bogus BIOS: Ignore DMI topology and use a single MC
+ * with only one DIMM for the whole address range to
+ * catch all errros.
+ */
+ struct dimm_info *dimm;

- mci = ghes_mc_create(dev, 0, num_dimm);
- if (!mci) {
- pr_info("Can't allocate memory for EDAC data\n");
- rc = -ENOMEM;
- goto unlock;
- }
+ mci = ghes_mc_create(dev, 0, 1);
+ if (!mci) {
+ rc = -ENOMEM;
+ goto unlock;
+ }
+
+ dimm = edac_get_dimm_by_index(mci, 0);
+
+ dimm->nr_pages = 1;
+ dimm->grain = 128;
+ dimm->mtype = MEM_UNKNOWN;
+ dimm->dtype = DEV_UNKNOWN;
+ dimm->edac_mode = EDAC_SECDED;
+
+ snprintf(dimm->label, sizeof(dimm->label), "unknown memory");
+
+ rc = ghes_mc_add(mci);
+ if (rc) {
+ ghes_mc_destroy(mci);
+ goto unlock;
+ }

- if (fake) {
pr_info("This system has a very crappy BIOS: It doesn't even list the DIMMS.\n");
pr_info("Its SMBIOS info is wrong. It is doubtful that the error report would\n");
pr_info("work on such system. Use this driver with caution\n");
- } else if (idx < 0) {
+
+ goto out;
+ }
+
+ if (idx < 0) {
pr_info("This EDAC driver relies on BIOS to enumerate memory and get error reports.\n");
pr_info("Unfortunately, not all BIOSes reflect the memory layout correctly.\n");
pr_info("So, the end result of using this driver varies from vendor to vendor.\n");
@@ -586,31 +605,31 @@ int ghes_edac_register(struct ghes *ghes, struct device *dev)
pr_info("This system has %d DIMM sockets.\n", num_dimm);
}

- if (!fake) {
- dimm_fill.index = 0;
- dimm_fill.mci = mci;
- dmi_walk(ghes_edac_dmidecode, &dimm_fill);
- } else {
- struct dimm_info *dimm = edac_get_dimm_by_index(mci, 0);
-
- dimm->nr_pages = 1;
- dimm->grain = 128;
- dimm->mtype = MEM_UNKNOWN;
- dimm->dtype = DEV_UNKNOWN;
- dimm->edac_mode = EDAC_SECDED;
+ mci = ghes_mc_create(dev, 0, num_dimm);
+ if (!mci) {
+ rc = -ENOMEM;
+ goto unlock;
}

+ dimm_fill.index = 0;
+ dimm_fill.mci = mci;
+
+ dmi_walk(ghes_edac_dmidecode, &dimm_fill);
+
rc = ghes_mc_add(mci);
if (rc < 0) {
- pr_info("Can't register at EDAC core\n");
ghes_mc_destroy(mci);
goto unlock;
}

+out:
/* only set on success */
refcount_set(&ghes_refcount, 1);

unlock:
+ if (rc < 0)
+ pr_info("Can't register at EDAC core\n");
+
mutex_unlock(&ghes_reg_mutex);

return rc;
--
2.20.1
\
 
 \ /
  Last update: 2020-05-19 12:46    [W:0.057 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site