lkml.org 
[lkml]   [2020]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip: x86/entry] x86/db: Split out dr6/7 handling
The following commit has been merged into the x86/entry branch of tip:

Commit-ID: 9a3d7c76d28e55173be5dd7cadbe8760fb814afa
Gitweb: https://git.kernel.org/tip/9a3d7c76d28e55173be5dd7cadbe8760fb814afa
Author: Peter Zijlstra <peterz@infradead.org>
AuthorDate: Mon, 06 Apr 2020 21:02:56 +02:00
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Tue, 19 May 2020 16:04:10 +02:00

x86/db: Split out dr6/7 handling

DR6/7 should be handled before nmi_enter() is invoked and restore after
nmi_exit() to minimize the exposure.

Split it out into helper inlines and bring it into the correct order.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.808628211@linutronix.de


---
arch/x86/kernel/hw_breakpoint.c | 6 +---
arch/x86/kernel/traps.c | 75 +++++++++++++++++++++++---------
2 files changed, 57 insertions(+), 24 deletions(-)

diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index d42fc0e..9ddf441 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -464,7 +464,7 @@ static int hw_breakpoint_handler(struct die_args *args)
{
int i, cpu, rc = NOTIFY_STOP;
struct perf_event *bp;
- unsigned long dr7, dr6;
+ unsigned long dr6;
unsigned long *dr6_p;

/* The DR6 value is pointed by args->err */
@@ -479,9 +479,6 @@ static int hw_breakpoint_handler(struct die_args *args)
if ((dr6 & DR_TRAP_BITS) == 0)
return NOTIFY_DONE;

- get_debugreg(dr7, 7);
- /* Disable breakpoints during exception handling */
- set_debugreg(0UL, 7);
/*
* Assert that local interrupts are disabled
* Reset the DRn bits in the virtualized register value.
@@ -538,7 +535,6 @@ static int hw_breakpoint_handler(struct die_args *args)
(dr6 & (~DR_TRAP_BITS)))
rc = NOTIFY_DONE;

- set_debugreg(dr7, 7);
put_cpu();

return rc;
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 21c8cfc..de5120e 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -700,6 +700,57 @@ static bool is_sysenter_singlestep(struct pt_regs *regs)
#endif
}

+static __always_inline void debug_enter(unsigned long *dr6, unsigned long *dr7)
+{
+ /*
+ * Disable breakpoints during exception handling; recursive exceptions
+ * are exceedingly 'fun'.
+ *
+ * Since this function is NOKPROBE, and that also applies to
+ * HW_BREAKPOINT_X, we can't hit a breakpoint before this (XXX except a
+ * HW_BREAKPOINT_W on our stack)
+ *
+ * Entry text is excluded for HW_BP_X and cpu_entry_area, which
+ * includes the entry stack is excluded for everything.
+ */
+ get_debugreg(*dr7, 7);
+ set_debugreg(0, 7);
+
+ /*
+ * Ensure the compiler doesn't lower the above statements into
+ * the critical section; disabling breakpoints late would not
+ * be good.
+ */
+ barrier();
+
+ /*
+ * The Intel SDM says:
+ *
+ * Certain debug exceptions may clear bits 0-3. The remaining
+ * contents of the DR6 register are never cleared by the
+ * processor. To avoid confusion in identifying debug
+ * exceptions, debug handlers should clear the register before
+ * returning to the interrupted task.
+ *
+ * Keep it simple: clear DR6 immediately.
+ */
+ get_debugreg(*dr6, 6);
+ set_debugreg(0, 6);
+ /* Filter out all the reserved bits which are preset to 1 */
+ *dr6 &= ~DR6_RESERVED;
+}
+
+static __always_inline void debug_exit(unsigned long dr7)
+{
+ /*
+ * Ensure the compiler doesn't raise this statement into
+ * the critical section; enabling breakpoints early would
+ * not be good.
+ */
+ barrier();
+ set_debugreg(dr7, 7);
+}
+
/*
* Our handling of the processor debug registers is non-trivial.
* We do not clear them on entry and exit from the kernel. Therefore
@@ -727,28 +778,13 @@ static bool is_sysenter_singlestep(struct pt_regs *regs)
dotraplinkage void do_debug(struct pt_regs *regs, long error_code)
{
struct task_struct *tsk = current;
+ unsigned long dr6, dr7;
int user_icebp = 0;
- unsigned long dr6;
int si_code;

- nmi_enter();
-
- get_debugreg(dr6, 6);
- /*
- * The Intel SDM says:
- *
- * Certain debug exceptions may clear bits 0-3. The remaining
- * contents of the DR6 register are never cleared by the
- * processor. To avoid confusion in identifying debug
- * exceptions, debug handlers should clear the register before
- * returning to the interrupted task.
- *
- * Keep it simple: clear DR6 immediately.
- */
- set_debugreg(0, 6);
+ debug_enter(&dr6, &dr7);

- /* Filter out all the reserved bits which are preset to 1 */
- dr6 &= ~DR6_RESERVED;
+ nmi_enter();

/*
* The SDM says "The processor clears the BTF flag when it
@@ -786,7 +822,7 @@ dotraplinkage void do_debug(struct pt_regs *regs, long error_code)
#endif

if (notify_die(DIE_DEBUG, "debug", regs, (long)&dr6, error_code,
- SIGTRAP) == NOTIFY_STOP)
+ SIGTRAP) == NOTIFY_STOP)
goto exit;

/*
@@ -825,6 +861,7 @@ dotraplinkage void do_debug(struct pt_regs *regs, long error_code)

exit:
nmi_exit();
+ debug_exit(dr7);
}
NOKPROBE_SYMBOL(do_debug);

\
 
 \ /
  Last update: 2020-05-19 22:03    [W:0.363 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site