lkml.org 
[lkml]   [2020]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] arm64: dts: qcom: Add initial support for Xiaomi Redmi Note 8T
On Sun 17 May 04:54 PDT 2020, Eli Riggs wrote:

> Adds initial device tree for Xiaomi Redmi Note 8T, codename xiaomi-willow.
> It uses the sm6125 SoC. Currently only boots into initrd shell over UART.
> Requires appended DTB with qcom,board-id = <0x22 0x0> and
> qcom,msm-id = <0x18a 0x10000> to actually boot.
>

If I read this correctly you need to supply board-id and msm-id in order
to be able to get this booting?

Even though we don't like them, I would prefer if you just add them in
the dts file, in this patch.

> Signed-off-by: Eli Riggs <eli@rje.li>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/sm6125-xiaomi-willow.dts | 19 +++++++++++++++++++
> 2 files changed, 20 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index cc103f7020fd6..060aa98200e47 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-willow.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dts
> new file mode 100644
> index 0000000000000..444b32ccb9d48
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dts
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: GPL-2.0-only

Please make this GPL/BSD dual license.

Apart from these few remarks your patches looks good, looking forward to
see more of this platform!

Regards,
Bjorn

> +// Copyright (c) 2020, Eli Riggs <eli@rje.li>
> +
> +/dts-v1/;
> +
> +#include "sm6125.dtsi"
> +
> +/ {
> + model = "Xiaomi Redmi Note 8T";
> + compatible = "xiaomi,willow", "qcom,sm6125";
> +
> + aliases {
> + serial0 = &qupv3_se4_2uart;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2020-05-19 08:12    [W:0.123 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site