[lkml]   [2020]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCHv3 2/2] dt-bindings: arm: coresight: Add support to skip trace unit power up
From: Tingwei Zhang <>

Add "qcom,skip-power-up" property to identify systems which can
skip powering up of trace unit since they share the same power
domain as their CPU core. This is required to identify such
systems with hardware errata which stops the CPU watchdog counter
when the power up bit is set (TRCPDCR.PU).

Signed-off-by: Tingwei Zhang <>
Co-developed-by: Sai Prakash Ranjan <>
Signed-off-by: Sai Prakash Ranjan <>
Documentation/devicetree/bindings/arm/coresight.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 846f6daae71b..e4b2eda0b53b 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -108,6 +108,13 @@ its hardware characteristcs.
* arm,cp14: must be present if the system accesses ETM/PTM management
registers via co-processor 14.

+ * qcom,skip-power-up: boolean. Indicates that an implementation can
+ skip powering up the trace unit. TRCPDCR.PU does not have to be set
+ on Qualcomm Technologies Inc. systems since ETMs are in the same power
+ domain as their CPU cores. This property is required to identify such
+ systems with hardware errata where the CPU watchdog counter is stopped
+ when TRCPDCR.PU is set.
* Optional property for TMC:

* arm,buffer-size: size of contiguous buffer space for TMC ETR
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
 \ /
  Last update: 2020-05-15 18:23    [W:0.070 / U:1.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site