lkml.org 
[lkml]   [2020]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 2/4] KEYS: trusted: Introduce TEE based Trusted Keys
From
Date
On Thu, 2020-05-14 at 12:57 +0530, Sumit Garg wrote:
> On Thu, 14 May 2020 at 05:58, Jarkko Sakkinen
> <jarkko.sakkinen@linux.intel.com> wrote:
> > On Wed, 2020-05-06 at 15:10 +0530, Sumit Garg wrote:
> > > Add support for TEE based trusted keys where TEE provides the functionality
> > > to seal and unseal trusted keys using hardware unique key.
> > >
> > > Refer to Documentation/tee.txt for detailed information about TEE.
> > >
> > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> >
> > The implementation looks solid but how or who could possibly test this?
> >
> > I do posses (personally, not from employer) bunch of ARM boards but my
> > TZ knowledge is somewhat limited (e.g. how can I get something running
> > in TZ).
> >
>
> Although, it should be fairly easy to test this implementation on an
> ARM board which supports OP-TEE. But since you are new to ARM
> TrustZone world, I would suggest you get used to OP-TEE on Qemu based
> setup. You could find pretty good documentation for this here [1] but
> for simplicity let me document steps here to test this trusted keys
> feature from scratch:
>
> # Install prerequisites as mentioned here [2]
>
> # Get the source code
> $ mkdir -p <optee-project>
> $ cd <optee-project>
> $ repo init -u https://github.com/OP-TEE/manifest.git -m qemu_v8.xml
> $ repo sync -j4 --no-clone-bundle
>
> # Get the toolchain
> $ cd <optee-project>/build
> $ make -j2 toolchains
>
> # As trusted keys work is based on latest tpmdd/master, so we can
> change Linux base as follows:
> $ cd <optee-project>/linux
> $ git remote add tpmdd git://git.infradead.org/users/jjs/linux-tpmdd.git
> $ git pull tpmdd
> $ git checkout -b tpmdd-master remotes/tpmdd/master
> # Cherry-pick and apply TEE features patch-set from this PR[3]
> # Apply this Linux trusted keys patch-set.
>
> # Now move on to build the source code
> $ cd <optee-project>/build
> # Apply attached "keyctl_change" patch
> $ patch -p1 < keyctl_change
> $ make -j`nproc`
> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c
>
> # Run QEMU setup
> $ make run-only
> # Type "c" on QEMU console to continue boot
>
> # Now there should be two virtual consoles up, one for OP-TEE and
> other for Linux
> # On Linux console, you can play with "keyctl" utility to have trusted
> and encrypted keys based on TEE.
>
> Do let me know in case you are stuck while following the above steps.
>
> [1] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8
> [2] https://optee.readthedocs.io/en/latest/building/prerequisites.html#prerequisites
> [3] https://lkml.org/lkml/2020/5/4/1062
>
> -Sumit

Thanks I'll try this out as soon as the v5.8 release hassle is over!

/Jarkko

\
 
 \ /
  Last update: 2020-05-15 01:43    [W:0.044 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site