lkml.org 
[lkml]   [2020]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v7 RESEND 07/13] spi: imx: fix ERR009165
Date
On 2020/05/13 Sascha Hauer <s.hauer@pengutronix.de> wrote:
> This patch is the one bisecting will end up with when somebody uses an older
> SDMA firmware or the ROM scripts. It should have a better description what
> happens and what should be done about it.
Emm..That's true. Timeout will be caught in such case, hence, maybe we can fall back it to pio always.
> >
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > Acked-by: Mark Brown <broonie@kernel.org>
> > ---
> > drivers/spi/spi-imx.c | 16 ++++++++--------
> > 1 file changed, 8 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index
> > f4f28a4..70df8e6 100644
> > --- a/drivers/spi/spi-imx.c
> > +++ b/drivers/spi/spi-imx.c
> > @@ -585,8 +585,8 @@ static int mx51_ecspi_prepare_transfer(struct
> spi_imx_data *spi_imx,
> > ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
> > spi_imx->spi_bus_clk = clk;
> >
> > - if (spi_imx->usedma)
> > - ctrl |= MX51_ECSPI_CTRL_SMC;
> > + /* ERR009165: work in XHC mode as PIO */
> > + ctrl &= ~MX51_ECSPI_CTRL_SMC;
> >
> > writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
> >
> > @@ -617,7 +617,7 @@ static void mx51_setup_wml(struct spi_imx_data
> *spi_imx)
> > * and enable DMA request.
> > */
> > writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
> > - MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
> > + MX51_ECSPI_DMA_TX_WML(0) |
> > MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
> > MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
> > MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
> @@ -1171,7
> > +1171,11 @@ static int spi_imx_dma_configure(struct spi_master *master)
> > tx.direction = DMA_MEM_TO_DEV;
> > tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
> > tx.dst_addr_width = buswidth;
> > - tx.dst_maxburst = spi_imx->wml;
> > + /*
> > + * For ERR009165 with tx_wml = 0 could enlarge burst size to fifo size
> > + * to speed up fifo filling as possible.
> > + */
> > + tx.dst_maxburst = spi_imx->devtype_data->fifo_size;
> > ret = dmaengine_slave_config(master->dma_tx, &tx);
> > if (ret) {
> > dev_err(spi_imx->dev, "TX dma configuration failed with %d\n",
> > ret); @@ -1265,10 +1269,6 @@ static int spi_imx_sdma_init(struct
> > device *dev, struct spi_imx_data *spi_imx, {
> > int ret;
> >
> > - /* use pio mode for i.mx6dl chip TKT238285 */
> > - if (of_machine_is_compatible("fsl,imx6dl"))
> > - return 0;
> > -
> > spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
> >
> > /* Prepare for TX DMA: */
> > --
> > 2.7.4
> >
> >
>
> --
> Pengutronix e.K. |
> |
> Steuerwalder Str. 21 |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pe
> ngutronix.de%2F&amp;data=02%7C01%7Cyibin.gong%40nxp.com%7C2f49309
> 819cc4c45418108d7f70e46fb%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%
> 7C1%7C637249513003506970&amp;sdata=RoLVnDaCfG20i88OmmlpbMH6lZu
> qqW2CJv4VSSDkPcM%3D&amp;reserved=0 |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0
> |
> Amtsgericht Hildesheim, HRA 2686 | Fax:
> +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2020-05-13 10:39    [W:1.731 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site