lkml.org 
[lkml]   [2020]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 3/5] bus: mhi: core: Skip handling BHI irq if MHI reg access is not allowed
On Tue, May 12, 2020 at 05:28:45PM -0700, Hemant Kumar wrote:
> Hi Mani,
>
> On 5/11/20 11:53 PM, Manivannan Sadhasivam wrote:
> > On Mon, May 11, 2020 at 07:03:07PM -0700, Hemant Kumar wrote:
> > > Driver continues handling of BHI interrupt even if MHI register access
> > > is not allowed. By doing so it calls the status call back and performs
> > > early notification for the MHI client. This is not needed when MHI
> > > register access is not allowed. Hence skip the handling in this case and
> > > return. Also add debug log to print device state, local EE and device EE
> > > when reg access is valid.
> > >
> > > Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
> > > Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
> > > ---
> > > drivers/bus/mhi/core/main.c | 21 ++++++++++++++-------
> > > 1 file changed, 14 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> > > index 9ec9b36..467c0ba 100644
> > > --- a/drivers/bus/mhi/core/main.c
> > > +++ b/drivers/bus/mhi/core/main.c
> > > @@ -369,22 +369,29 @@ irqreturn_t mhi_irq_handler(int irq_number, void *dev)
> > > return IRQ_HANDLED;
> > > }
> > > -irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *dev)
> > > +irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
> > > {
> > > - struct mhi_controller *mhi_cntrl = dev;
> > > + struct mhi_controller *mhi_cntrl = priv;
> > > + struct device *dev = &mhi_cntrl->mhi_dev->dev;
> > > enum mhi_state state = MHI_STATE_MAX;
> > > enum mhi_pm_state pm_state = 0;
> > > enum mhi_ee_type ee = 0;
> > > write_lock_irq(&mhi_cntrl->pm_lock);
> > > - if (MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
> > > - state = mhi_get_mhi_state(mhi_cntrl);
> > > - ee = mhi_cntrl->ee;
> > > - mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
> > > + if (!MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
> > > + write_unlock_irq(&mhi_cntrl->pm_lock);
> >
> > write_lock is only used for protecting 'mhi_cntrl->ee' but here we are not
> > updating it if reg access is not valid. So there is no reason to hold this lock.
> Original code is using write_lock to protect pm_state as well as
> mhi_cntrl->ee. This patch is keeping the lock same as original code. Just if
> condition logic is negated here due to that write_unlock_irq is added under
> if condition.

'mhi_cntrl->pm_state' is not always protected by 'pm_lock' and that too
write_lock is used here but 'pm_state' is not modified. So as like in most of
the places, locks are abused here as well.

I think after 5.8, you should really think about fixing the usage of locks
throughout the MHI stack.

So I'll take this patch as it is.

Thanks,
Mani

> >
> > > + goto exit_intvec;
> > > }
> > > + state = mhi_get_mhi_state(mhi_cntrl);
> > > + ee = mhi_cntrl->ee;
> > > + mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
> >
> > But it is needed here.
> >
> > Thanks,
> > Mani
> >
> > > + dev_dbg(dev, "local ee:%s device ee:%s dev_state:%s\n",
> > > + TO_MHI_EXEC_STR(mhi_cntrl->ee), TO_MHI_EXEC_STR(ee),
> > > + TO_MHI_STATE_STR(state));
> > > +
> > > if (state == MHI_STATE_SYS_ERR) {
> > > - dev_dbg(&mhi_cntrl->mhi_dev->dev, "System error detected\n");
> > > + dev_dbg(dev, "System error detected\n");
> > > pm_state = mhi_tryset_pm_state(mhi_cntrl,
> > > MHI_PM_SYS_ERR_DETECT);
> > > }
> > > --
> > > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> > > a Linux Foundation Collaborative Project
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2020-05-13 09:05    [W:0.079 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site