lkml.org 
[lkml]   [2020]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend
From
Date
On 5/12/2020 3:47 AM, Stanley Chu wrote:
> Currently UFS host driver promises VCC supply if UFS device
> needs to do WriteBooster flush during runtime suspend.
>
> However the UFS specification mentions,
>
> "While the flushing operation is in progress, the device is
> in Active power mode."
>
> Therefore UFS host driver needs to promise more: Keep UFS
> device as "Active power mode", otherwise UFS device shall not
> do any flush if device enters Sleep or PowerDown power mode.
>
> Fix this by not changing device power mode if WriteBooster
> flush is required in ufshcd_suspend().
>
> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
> ---
> drivers/scsi/ufs/ufs.h | 1 -
> drivers/scsi/ufs/ufshcd.c | 39 +++++++++++++++++++--------------------
> 2 files changed, 19 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index b3135344ab3f..9e4bc2e97ada 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -577,7 +577,6 @@ struct ufs_dev_info {
> u32 d_ext_ufs_feature_sup;
> u8 b_wb_buffer_type;
> u32 d_wb_alloc_units;
> - bool keep_vcc_on;
> u8 b_presrv_uspc_en;
> };
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 169a3379e468..2d0aff8ac260 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
> !hba->dev_info.is_lu_power_on_wp) {
> ufshcd_setup_vreg(hba, false);
> } else if (!ufshcd_is_ufs_dev_active(hba)) {
> - if (!hba->dev_info.keep_vcc_on)
> - ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> if (!ufshcd_is_link_active(hba)) {
> ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
> ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
> @@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> enum ufs_pm_level pm_lvl;
> enum ufs_dev_pwr_mode req_dev_pwr_mode;
> enum uic_link_state req_link_state;
> + bool keep_curr_dev_pwr_mode = false;
>
> hba->pm_op_in_progress = 1;
> if (!ufshcd_is_shutdown_pm(pm_op)) {
> @@ -8226,28 +8226,27 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> /* make sure that auto bkops is disabled */
> ufshcd_disable_auto_bkops(hba);
> }
> +
Unnecessary newline, perhaps?
> /*
> - * With wb enabled, if the bkops is enabled or if the
> - * configured WB type is 70% full, keep vcc ON
> - * for the device to flush the wb buffer
> + * If device needs to do BKOP or WB buffer flush, keep device
> + * power mode as "active power mode" and its VCC supply.
> */
> - if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
> - ufshcd_wb_keep_vcc_on(hba))
> - hba->dev_info.keep_vcc_on = true;
> - else
> - hba->dev_info.keep_vcc_on = false;
> - } else {
> - hba->dev_info.keep_vcc_on = false;
> + keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
> + ufshcd_wb_keep_vcc_on(hba);
Should the device be in UFS_ACTIVE_PWR_MODE to perform auto-bkops?

Also, is it needed to keep the device in UFS_ACTIVE_PWR_MODE , if flush
on hibern8 is enabled and the link is being put to hibern8 mode during
runtime-suspend? Perhaps that should also be factored in here?
> }
>
> - if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
> - ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> - !ufshcd_is_runtime_pm(pm_op))) {
> - /* ensure that bkops is disabled */
> - ufshcd_disable_auto_bkops(hba);
> - ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> - if (ret)
> - goto enable_gating;
> + if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
> + if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> + !ufshcd_is_runtime_pm(pm_op)) {
> + /* ensure that bkops is disabled */
> + ufshcd_disable_auto_bkops(hba);
> + }
> +
> + if (!keep_curr_dev_pwr_mode) {
> + ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);

Now, when the WB buffer is completely flushed out, the device should be
put back into UFS_SLEEP_PWR_MODE or UFS_POWERDOWN_PWR_MODE. Say, the
device buffer has to be flushed and during runtime-suspend, the device
is put to UFS_ACTIVE_PWR_MODE and Vcc is kept ON; the device doesn't
resume nor does the system enters suspend for a very long time, and with
AH8 and hibern8 disabled, there will be an unnecessary power drain for
that much time.

How about a periodic interval checking of flush status if
keep_curr_dev_pwr_mode evaluates to be true?

> + if (ret)
> + goto enable_gating;
> + }
> }
>
> flush_work(&hba->eeh_work);
>



--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2020-05-13 21:31    [W:0.150 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site