lkml.org 
[lkml]   [2020]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 net-next 06/15] net: dsa: sja1105: allow VLAN configuration from the bridge in all states
Date
From: Vladimir Oltean <vladimir.oltean@nxp.com>

Let the DSA core call our .port_vlan_add methods every time the bridge
layer requests so. We will deal internally with saving/restoring VLANs
depending on our VLAN awareness state.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v3:
Adapt to the second variable name change.

Changes in v2:
Adapt to variable name change.

drivers/net/dsa/sja1105/sja1105_main.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index fb95130299b1..ca5a9baa0b2f 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2350,6 +2350,8 @@ static int sja1105_setup(struct dsa_switch *ds)

ds->mtu_enforcement_ingress = true;

+ ds->configure_vlan_while_not_filtering = true;
+
/* The DSA/switchdev model brings up switch ports in standalone mode by
* default, and that means vlan_filtering is 0 since they're not under
* a bridge, so it's safe to set up switch tagging at this time.
--
2.17.1
\
 
 \ /
  Last update: 2020-05-12 19:22    [W:0.283 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site