lkml.org 
[lkml]   [2020]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH v2 1/3] dt-bindings: phy: Drop reset-gpios from marvell,mmp3-hsic-phy
From
Date
+Rob

On 5/9/2020 1:47 PM, Lubomir Rintel wrote:
> This has been added in error -- the PHY block doesn't have a reset pin.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
> .../devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml | 7 -------
> 1 file changed, 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> index 00609ace677c..30e290c57930 100644
> --- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> @@ -18,27 +18,20 @@ properties:
> maxItems: 1
> description: base address of the device
>
> - reset-gpios:
> - maxItems: 1
> - description: GPIO connected to reset
> -
> "#phy-cells":
> const: 0
>
> required:
> - compatible
> - reg
> - - reset-gpios
> - "#phy-cells"
>
> additionalProperties: false
>
> examples:
> - |
> - #include <dt-bindings/gpio/gpio.h>
> hsic-phy@f0001800 {
> compatible = "marvell,mmp3-hsic-phy";
> reg = <0xf0001800 0x40>;
> - reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
> #phy-cells = <0>;
> };
>

\
 
 \ /
  Last update: 2020-05-13 04:34    [W:0.051 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site