lkml.org 
[lkml]   [2020]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/6] ARM: dts: omap4-droid4: Configure modem for serdev-ngsm
Date
Let's enable the TS 27.010 /dev/gsmmux* interfaces via Linux n_gsm that
can be used for voice calls and SMS with commands using a custom Motorola
format.

And let's also enable the kernel GNSS driver via serdev-ngsm that uses a
dedicated TS 27.010 channel.

Note that voice call audio mixer is not supported yet.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/motorola-mapphone-common.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -698,6 +698,20 @@ &uart1 {
pinctrl-0 = <&uart1_pins>;
interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core 0xfc>;
+
+ modem {
+ compatible = "motorola,mapphone-mdm6600-serial";
+ ttymask = <0 0x00001fee>;
+ phys = <&fsusb1_phy>;
+ phy-names = "usb";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gnss@4 {
+ compatible = "motorola,mapphone-mdm6600-gnss";
+ reg = <4>;
+ };
+ };
};

&uart3 {
--
2.26.2
\
 
 \ /
  Last update: 2020-05-12 23:48    [W:0.191 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site