lkml.org 
[lkml]   [2020]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/8] dt-bindings: net: meson-dwmac: Add the amlogic,rx-delay-ns property
Date
The PRG_ETHERNET registers on Meson8b and newer SoCs can add an RX
delay. Add a property with the known supported values so it can be
configured according to the board layout.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../bindings/net/amlogic,meson-dwmac.yaml | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index ae91aa9d8616..66074314e57a 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -67,6 +67,19 @@ allOf:
PHY and MAC are adding a delay).
Any configuration is ignored when the phy-mode is set to "rmii".

+ amlogic,rx-delay-ns:
+ enum:
+ - 0
+ - 2
+ default: 0
+ description:
+ The internal RGMII RX clock delay (provided by this IP block) in
+ nanoseconds. When phy-mode is set to "rgmii" then the RX delay
+ should be explicitly configured. When the phy-mode is set to
+ either "rgmii-id" or "rgmii-rxid" the RX clock delay is already
+ provided by the PHY. Any configuration is ignored when the
+ phy-mode is set to "rmii".
+
properties:
compatible:
additionalItems: true
--
2.26.2
\
 
 \ /
  Last update: 2020-05-12 23:12    [W:0.091 / U:30.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site