lkml.org 
[lkml]   [2020]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 01/17] dt-bindings: spi: Convert DW SPI binding to DT schema
+Cc: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>

On Fri, May 08, 2020 at 10:39:34PM +0300, Andy Shevchenko wrote:
> On Fri, May 08, 2020 at 04:29:26PM +0300, Serge Semin wrote:
> > Modern device tree bindings are supposed to be created as YAML-files
> > in accordance with dt-schema. This commit replaces two DW SPI legacy
> > bare text bindings with YAML file. As before the bindings file states
> > that the corresponding dts node is supposed to be compatible either
> > with generic DW APB SSI controller or with Microsemi/Amazon/Renesas
> > vendors-specific controllers, to have registers, interrupts and clocks
> > properties. Though in case of Microsemi version of the controller
> > there must be two registers resources specified. Properties like
> > clock-names, reg-io-width, cs-gpio, num-cs and SPI-specific sub-nodes
> > are optional.
>
> Can you incorporate work done here or agree with Wan how to proceed?
>
> https://lore.kernel.org/linux-spi/20200505191910.GA2970@bogus/T/#md626b5f6f2294b0ebd70995d5ed0e67a360e000b

Don't worry. I'll make sure the updates provided by Wan including the new IP
support are preserved after rebasing this series on top of the spi/for-next.

-Sergey

>
> >
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
> > Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
> > Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> > Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> > Cc: Paul Burton <paulburton@kernel.org>
> > Cc: Ralf Baechle <ralf@linux-mips.org>
> > Cc: Arnd Bergmann <arnd@arndb.de>
> > Cc: Allison Randal <allison@lohutok.net>
> > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > Cc: Gareth Williams <gareth.williams.jx@renesas.com>
> > Cc: linux-mips@vger.kernel.org
> > ---
> > .../bindings/spi/snps,dw-apb-ssi.txt | 41 -------
> > .../bindings/spi/snps,dw-apb-ssi.yaml | 113 ++++++++++++++++++
> > .../devicetree/bindings/spi/spi-dw.txt | 24 ----
> > 3 files changed, 113 insertions(+), 65 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
> > create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> > delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt
> >
> > diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
> > deleted file mode 100644
> > index 3ed08ee9feba..000000000000
> > --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
> > +++ /dev/null
> > @@ -1,41 +0,0 @@
> > -Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
> > -
> > -Required properties:
> > -- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or
> > - "jaguar2", or "amazon,alpine-dw-apb-ssi"
> > -- reg : The register base for the controller. For "mscc,<soc>-spi", a second
> > - register set is required (named ICPU_CFG:SPI_MST)
> > -- interrupts : One interrupt, used by the controller.
> > -- #address-cells : <1>, as required by generic SPI binding.
> > -- #size-cells : <0>, also as required by generic SPI binding.
> > -- clocks : phandles for the clocks, see the description of clock-names below.
> > - The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock
> > - is optional. If a single clock is specified but no clock-name, it is the
> > - "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first.
> > -
> > -Optional properties:
> > -- clock-names : Contains the names of the clocks:
> > - "ssi_clk", for the core clock used to generate the external SPI clock.
> > - "pclk", the interface clock, required for register access. If a clock domain
> > - used to enable this clock then it should be named "pclk_clkdomain".
> > -- cs-gpios : Specifies the gpio pins to be used for chipselects.
> > -- num-cs : The number of chipselects. If omitted, this will default to 4.
> > -- reg-io-width : The I/O register width (in bytes) implemented by this
> > - device. Supported values are 2 or 4 (the default).
> > -
> > -Child nodes as per the generic SPI binding.
> > -
> > -Example:
> > -
> > - spi@fff00000 {
> > - compatible = "snps,dw-apb-ssi";
> > - reg = <0xfff00000 0x1000>;
> > - interrupts = <0 154 4>;
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - clocks = <&spi_m_clk>;
> > - num-cs = <2>;
> > - cs-gpios = <&gpio0 13 0>,
> > - <&gpio0 14 0>;
> > - };
> > -
> > diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> > new file mode 100644
> > index 000000000000..e2f6d8aa6181
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> > @@ -0,0 +1,113 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/spi/snps,dw-apb-ssi.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface
> > +
> > +maintainers:
> > + - Mark Brown <broonie@kernel.org>
> > +
> > +allOf:
> > + - $ref: "spi-controller.yaml#"
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - mscc,ocelot-spi
> > + - mscc,jaguar2-spi
> > + then:
> > + properties:
> > + reg:
> > + minItems: 2
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - description: Generic DW SPI controller
> > + const: snps,dw-apb-ssi
> > + - description: Microsemi Ocelot/Jaguar2 SoC SPI controller
> > + items:
> > + - enum:
> > + - mscc,ocelot-spi
> > + - mscc,jaguar2-spi
> > + - const: snps,dw-apb-ssi
> > + - description: Amazon Alpine SPI controller
> > + const: amazon,alpine-dw-apb-ssi
> > + - description: Renesas RZ/N1 SPI controlle.
> > + items:
> > + - const: renesas,rzn1-spi
> > + - const: snps,dw-apb-ssi
> > +
> > + reg:
> > + minItems: 1
> > + items:
> > + - description: DW APB SSI controller memory mapped registers
> > + - description: SPI MST region map
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + minItems: 1
> > + items:
> > + - description: SPI Controller reference clock source
> > + - description: APB interface clock source
> > +
> > + clock-names:
> > + minItems: 1
> > + items:
> > + - const: ssi_clk
> > + - const: pclk
> > +
> > + reg-io-width:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + description: I/O register width (in bytes) implemented by this device
> > + default: 4
> > + enum: [ 2, 4 ]
> > +
> > + num-cs:
> > + default: 4
> > + minimum: 1
> > + maximum: 4
> > +
> > +patternProperties:
> > + "^.*@[0-9a-f]+$":
> > + type: object
> > + properties:
> > + reg:
> > + minimum: 0
> > + maximum: 3
> > +
> > + spi-rx-bus-width:
> > + const: 1
> > +
> > + spi-tx-bus-width:
> > + const: 1
> > +
> > +unevaluatedProperties: false
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - "#address-cells"
> > + - "#size-cells"
> > + - interrupts
> > + - clocks
> > +
> > +examples:
> > + - |
> > + spi@fff00000 {
> > + compatible = "snps,dw-apb-ssi";
> > + reg = <0xfff00000 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + interrupts = <0 154 4>;
> > + clocks = <&spi_m_clk>;
> > + num-cs = <2>;
> > + cs-gpios = <&gpio0 13 0>,
> > + <&gpio0 14 0>;
> > + };
> > +...
> > diff --git a/Documentation/devicetree/bindings/spi/spi-dw.txt b/Documentation/devicetree/bindings/spi/spi-dw.txt
> > deleted file mode 100644
> > index 7b63ed601990..000000000000
> > --- a/Documentation/devicetree/bindings/spi/spi-dw.txt
> > +++ /dev/null
> > @@ -1,24 +0,0 @@
> > -Synopsys DesignWare SPI master
> > -
> > -Required properties:
> > -- compatible: should be "snps,designware-spi"
> > -- #address-cells: see spi-bus.txt
> > -- #size-cells: see spi-bus.txt
> > -- reg: address and length of the spi master registers
> > -- interrupts: should contain one interrupt
> > -- clocks: spi clock phandle
> > -- num-cs: see spi-bus.txt
> > -
> > -Optional properties:
> > -- cs-gpios: see spi-bus.txt
> > -
> > -Example:
> > -
> > -spi: spi@4020a000 {
> > - compatible = "snps,designware-spi";
> > - interrupts = <11 1>;
> > - reg = <0x4020a000 0x1000>;
> > - clocks = <&pclk>;
> > - num-cs = <2>;
> > - cs-gpios = <&banka 0 0>;
> > -};
> > --
> > 2.25.1
> >
>
> --
> With Best Regards,
> Andy Shevchenko
>
>

\
 
 \ /
  Last update: 2020-05-12 22:29    [W:0.115 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site