lkml.org 
[lkml]   [2020]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subjectsignal quality and cable diagnostic
    Hi Andrew,

    First of all, great work! As your cable diagnostic patches are in
    net-next now and can be used as base for the follow-up discussion.

    Do you already have ethtool patches somewhere? :=) Can you please give a
    link for testing?

    I continue to work on TJA11xx PHY and need to export some additional
    cable diagnostic/link stability information: Signal Quality Index (SQI).
    The PHY data sheet describes it as following [1]:
    ================================================================================
    6.10.3 Link stability

    The signal-to-noise ratio is the parameter used to estimate link
    stability. The PMA Receive function monitors the signal-to-noise ratio
    continuously. Once the signal-to-noise ratio falls below a configurable
    threshold (SQI_FAILLIMIT), the link status is set to FAIL and
    communication is interrupted. The TJA1100 allows for adjusting the
    sensitivity of the PMA Receive function by configuring this threshold.
    The microcontroller can always check the current value of the
    signal-to-noise ratio via the SMI, allowing it to track a possible
    degradation in link stability.
    ================================================================================

    Since this functionality is present at least on TJA11xx PHYs and
    mandatory according to Open Alliance[2], I hope this functionality is
    present on other 100/1000Base-T1 PHYs. So may be some common abstraction
    is possible. What would be the best place to provide it for the user
    space? According to the [2] SQI, is the part of Dynamic Channel Quality
    (DCQ) together with Mean Square Error (MSE) and Peak MSE value (pMSE).

    [1] https://www.nxp.com/docs/en/data-sheet/TJA1100.pdf
    [2] http://www.opensig.org/download/document/218/Advanced_PHY_features_for_automotive_Ethernet_V1.0.pdf
    http://www.opensig.org/download/document/225/Open_Alliance_100BASE-T1_PMA_Test_Suite_v1.0-dec.pdf

    --
    Pengutronix e.K. | |
    Steuerwalder Str. 21 | http://www.pengutronix.de/ |
    31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
    Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

    \
     
     \ /
      Last update: 2020-05-11 16:14    [W:3.565 / U:0.552 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site