lkml.org 
[lkml]   [2020]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 net-next 01/15] net: dsa: provide an option for drivers to always receive bridge VLANs
Date
From: Russell King <rmk+kernel@armlinux.org.uk>

DSA assumes that a bridge which has vlan filtering disabled is not
vlan aware, and ignores all vlan configuration. However, the kernel
software bridge code allows configuration in this state.

This causes the kernel's idea of the bridge vlan state and the
hardware state to disagree, so "bridge vlan show" indicates a correct
configuration but the hardware lacks all configuration. Even worse,
enabling vlan filtering on a DSA bridge immediately blocks all traffic
which, given the output of "bridge vlan show", is very confusing.

Provide an option that drivers can set to indicate they want to receive
vlan configuration even when vlan filtering is disabled. At the very
least, this is safe for Marvell DSA bridges, which do not look up
ingress traffic in the VTU if the port is in 8021Q disabled state. It is
also safe for the Ocelot switch family. Whether this change is suitable
for all DSA bridges is not known.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Changes in v2:
Rename variable from vlan_bridge_vtu to configure_vlans_while_disabled.

include/net/dsa.h | 7 +++++++
net/dsa/slave.c | 12 ++++++++----
2 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/include/net/dsa.h b/include/net/dsa.h
index 312c2f067e65..e794c15d27de 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -282,6 +282,13 @@ struct dsa_switch {
*/
bool vlan_filtering_is_global;

+ /* Pass .port_vlan_add and .port_vlan_del to drivers even for bridges
+ * that have vlan_filtering=0. All drivers should ideally set this (and
+ * then the option would get removed), but it is unknown whether this
+ * would break things or not.
+ */
+ bool configure_vlans_while_disabled;
+
/* In case vlan_filtering_is_global is set, the VLAN awareness state
* should be retrieved from here and not from the per-port settings.
*/
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 61b0de52040a..06ac7641438e 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -314,7 +314,8 @@ static int dsa_slave_vlan_add(struct net_device *dev,
if (obj->orig_dev != dev)
return -EOPNOTSUPP;

- if (dp->bridge_dev && !br_vlan_enabled(dp->bridge_dev))
+ if (dp->bridge_dev && !br_vlan_enabled(dp->bridge_dev) &&
+ !dp->ds->configure_vlans_while_disabled)
return 0;

vlan = *SWITCHDEV_OBJ_PORT_VLAN(obj);
@@ -381,7 +382,8 @@ static int dsa_slave_vlan_del(struct net_device *dev,
if (obj->orig_dev != dev)
return -EOPNOTSUPP;

- if (dp->bridge_dev && !br_vlan_enabled(dp->bridge_dev))
+ if (dp->bridge_dev && !br_vlan_enabled(dp->bridge_dev) &&
+ !dp->ds->configure_vlans_while_disabled)
return 0;

/* Do not deprogram the CPU port as it may be shared with other user
@@ -1240,7 +1242,8 @@ static int dsa_slave_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
* need to emulate the switchdev prepare + commit phase.
*/
if (dp->bridge_dev) {
- if (!br_vlan_enabled(dp->bridge_dev))
+ if (!dp->ds->configure_vlans_while_disabled &&
+ !br_vlan_enabled(dp->bridge_dev))
return 0;

/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
@@ -1274,7 +1277,8 @@ static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
* need to emulate the switchdev prepare + commit phase.
*/
if (dp->bridge_dev) {
- if (!br_vlan_enabled(dp->bridge_dev))
+ if (!dp->ds->configure_vlans_while_disabled &&
+ !br_vlan_enabled(dp->bridge_dev))
return 0;

/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
--
2.17.1
\
 
 \ /
  Last update: 2020-05-11 15:54    [W:1.232 / U:2.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site