lkml.org 
[lkml]   [2020]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 3/3] spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods
Date
The original implementation set num_chipselect to ROCKCHIP_SPI_MAX_CS_NUM (2)
which seems wrong here. spi0 has 2 native cs, all others just one. With
enable and use of cs_gpiods / GPIO CS, its correct to set the num_chipselect
from the num-cs property and set max_native_cs with the define.
If num-cs is missing the default set to num_chipselect = 1.

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
drivers/spi/spi-rockchip.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index f57a8faa6f31..9b8a5e1233c0 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -708,8 +708,15 @@ static int rockchip_spi_probe(struct platform_device *pdev)
ctlr->slave_abort = rockchip_spi_slave_abort;
} else {
ctlr->flags = SPI_MASTER_GPIO_SS;
+ ctlr->max_native_cs = ROCKCHIP_SPI_MAX_CS_NUM;
+ /*
+ * rk spi0 has two native cs, spi1..5 one cs only
+ * if num-cs is missing in the dts, default to 1
+ */
+ if (of_property_read_u16(np, "num-cs", &ctlr->num_chipselect))
+ ctlr->num_chipselect = 1;
+ ctlr->use_gpio_descriptors = true;
}
- ctlr->num_chipselect = ROCKCHIP_SPI_MAX_CS_NUM;
ctlr->dev.of_node = pdev->dev.of_node;
ctlr->bits_per_word_mask = SPI_BPW_MASK(16) | SPI_BPW_MASK(8) | SPI_BPW_MASK(4);
ctlr->min_speed_hz = rs->freq / BAUDR_SCKDV_MAX;
--
2.20.1
\
 
 \ /
  Last update: 2020-05-11 10:31    [W:0.061 / U:0.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site