lkml.org 
[lkml]   [2020]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] remoteproc: Add inline coredump functionality
On 2020-05-11 17:30, Bjorn Andersson wrote:
> On Mon 11 May 17:11 PDT 2020, rishabhb@codeaurora.org wrote:
>
>> On 2020-05-07 13:21, Bjorn Andersson wrote:
>> > On Thu 16 Apr 11:38 PDT 2020, Rishabh Bhatnagar wrote:
>> >
>> > > This patch adds the inline coredump functionality. The current
>> > > coredump implementation uses vmalloc area to copy all the segments.
>> > > But this might put a lot of strain on low memory targets as the
>> > > firmware size sometimes is in ten's of MBs. The situation becomes
>> > > worse if there are multiple remote processors undergoing recovery
>> > > at the same time. This patch directly copies the device memory to
>> > > userspace buffer and avoids extra memory usage. This requires
>> > > recovery to be halted until data is read by userspace and free
>> > > function is called.
>> > >
>> > > Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
>> > > ---
>> > > drivers/remoteproc/remoteproc_coredump.c | 130
>> > > +++++++++++++++++++++++++++++++
>> > > drivers/remoteproc/remoteproc_internal.h | 23 +++++-
>> > > include/linux/remoteproc.h | 2 +
>> > > 3 files changed, 153 insertions(+), 2 deletions(-)
>> > >
>> > > diff --git a/drivers/remoteproc/remoteproc_coredump.c
>> > > b/drivers/remoteproc/remoteproc_coredump.c
>> > > index 9de0467..888b7dec91 100644
>> > > --- a/drivers/remoteproc/remoteproc_coredump.c
>> > > +++ b/drivers/remoteproc/remoteproc_coredump.c
>> > > @@ -12,6 +12,84 @@
>> > > #include <linux/remoteproc.h>
>> > > #include "remoteproc_internal.h"
>> > >
>> > > +static void rproc_free_dump(void *data)
>> >
>> > rproc_coredump_free()
>> >
>> > > +{
>> > > + struct rproc_coredump_state *dump_state = data;
>> > > +
>> > > + complete(&dump_state->dump_done);
>> >
>> > vfree(dump_state->header);
>> >
>> > > +}
>> > > +
>> > > +static unsigned long resolve_addr(loff_t user_offset,
>> >
>> > rproc_coredump_find_segment()
>> >
>> > > + struct list_head *segments,
>> > > + unsigned long *data_left)
>> > > +{
>> > > + struct rproc_dump_segment *segment;
>> > > +
>> > > + list_for_each_entry(segment, segments, node) {
>> > > + if (user_offset >= segment->size)
>> > > + user_offset -= segment->size;
>> > > + else
>> > > + break;
>> >
>> > if (user_offset < segment->size) {
>> > *data_left = segment->size - user_offset;
>> > return segment->da + user_offset;
>> > }
>> >
>> > user_offset -= segment->size;
>> > > + }
>> >
>> > *data_left = 0;
>> > return 0;
>> >
>> > > +
>> > > + if (&segment->node == segments) {
>> > > + *data_left = 0;
>> > > + return 0;
>> > > + }
>> > > +
>> > > + *data_left = segment->size - user_offset;
>> > > +
>> > > + return segment->da + user_offset;
>> > > +}
>> > > +
>> > > +static ssize_t rproc_read_dump(char *buffer, loff_t offset, size_t
>> > > count,
>> > > + void *data, size_t header_size)
>> > > +{
>> > > + void *device_mem;
>> > > + size_t data_left, copy_size, bytes_left = count;
>> > > + unsigned long addr;
>> > > + struct rproc_coredump_state *dump_state = data;
>> > > + struct rproc *rproc = dump_state->rproc;
>> > > + void *elfcore = dump_state->header;
>> > > +
>> > > + /* Copy the header first */
>> > > + if (offset < header_size) {
>> > > + copy_size = header_size - offset;
>> > > + copy_size = min(copy_size, bytes_left);
>> > > +
>> > > + memcpy(buffer, elfcore + offset, copy_size);
>> > > + offset += copy_size;
>> > > + bytes_left -= copy_size;
>> > > + buffer += copy_size;
>> > > + }
>> >
>> > Perhaps you can take inspiration from devcd_readv() here?
>> >
>> > > +
>> > > + while (bytes_left) {
>> > > + addr = resolve_addr(offset - header_size,
>> > > + &rproc->dump_segments, &data_left);
>> > > + /* EOF check */
>> > > + if (data_left == 0) {
>> >
>> > Afaict data_left denotes the amount of data left in this particular
>> > segment, rather than in the entire core.
>> >
>> Yes, but it only returns 0 when the final segment has been copied
>> completely. Otherwise it gives data left to copy for every segment
>> and moves to next segment once the current one is copied.
>
> You're right.
>
>> > I think you should start by making bytes_left the minimum of the core
>> > size and @count and then have this loop as long as bytes_left, copying
>> > data to the buffer either from header or an appropriate segment based on
>> > the current offset.
>> >
>> That would require an extra function that calculates entire core size,
>> as its not available right now. Do you see any missed corner cases
>> with this
>> approach?
>
> You're looping over all the segments as you're building the header
> anyways, so you could simply store this in the dump_state. I think this
> depend more on the ability to reuse the read function between inline
> and
> default coredump.
>
> Regards,
> Bjorn

Wouldn't the first if condition take care of "default" dump as it is?
The header_size in that case would involve the 'header + all segments'.
>
>> > > + pr_info("Ramdump complete %lld bytes read", offset);
>> >
>> > dev_dbg(&rproc->dev, ...)
>> >
>> > > + break;
>> > > + }
>> > > +
>> > > + copy_size = min_t(size_t, bytes_left, data_left);
>> > > +
>> > > + device_mem = rproc->ops->da_to_va(rproc, addr, copy_size);
>> >
>> > rproc_da_to_va()
>> >
>> > > + if (!device_mem) {
>> > > + pr_err("Address:%lx with size %zd out of remoteproc carveout\n",
>> >
>> > dev_err(&rproc->dev, "coredump: %#lx size %#zx outside of carveouts\n",
>> > ..);
>> >
>> > > + addr, copy_size);
>> > > + return -ENOMEM;
>> > > + }
>> > > + memcpy(buffer, device_mem, copy_size);
>> > > +
>> > > + offset += copy_size;
>> > > + buffer += copy_size;
>> > > + bytes_left -= copy_size;
>> > > + }
>> > > +
>> > > + return count - bytes_left;
>> > > +}
>> > > +
>> > > static void create_elf_header(void *data, int phnum, struct rproc
>> > > *rproc)
>> > > {
>> > > struct elf32_phdr *phdr;
>> > > @@ -55,6 +133,58 @@ static void create_elf_header(void *data, int
>> > > phnum, struct rproc *rproc)
>> > > }
>> > >
>> > > /**
>> > > + * rproc_inline_coredump() - perform synchronized coredump
>> > > + * @rproc: rproc handle
>> > > + *
>> > > + * This function will generate an ELF header for the registered
>> > > segments
>> > > + * and create a devcoredump device associated with rproc. This
>> > > function
>> > > + * directly copies the segments from device memory to userspace. The
>> > > + * recovery is stalled until the enitire coredump is read. This
>> > > approach
>> > > + * avoids using extra vmalloc memory(which can be really large).
>> > > + */
>> > > +void rproc_inline_coredump(struct rproc *rproc)
>> > > +{
>> > > + struct rproc_dump_segment *segment;
>> > > + struct elf32_phdr *phdr;
>> > > + struct elf32_hdr *ehdr;
>> > > + struct rproc_coredump_state *dump_state;
>> >
>> > This can live on the stack, unless you follow my suggestion below...
>> >
>> > > + size_t header_size;
>> > > + void *data;
>> > > + int phnum = 0;
>> > > +
>> > > + if (list_empty(&rproc->dump_segments))
>> > > + return;
>> > > +
>> > > + header_size = sizeof(*ehdr);
>> > > + list_for_each_entry(segment, &rproc->dump_segments, node) {
>> > > + header_size += sizeof(*phdr);
>> > > +
>> > > + phnum++;
>> > > + }
>> > > +
>> > > + data = vmalloc(header_size);
>> > > + if (!data)
>> > > + return;
>> > > +
>> > > + ehdr = data;
>> >
>> > ehdr is unused.
>> >
>> > > + create_elf_header(data, phnum, rproc);
>> > > +
>> > > + dump_state = kzalloc(sizeof(*dump_state), GFP_KERNEL);
>> > > + dump_state->rproc = rproc;
>> > > + dump_state->header = data;
>> > > + init_completion(&dump_state->dump_done);
>> > > +
>> > > + dev_coredumpm(&rproc->dev, NULL, dump_state, header_size,
>> > > GFP_KERNEL,
>> > > + rproc_read_dump, rproc_free_dump);
>> >
>> > I can help feeling that if you vmalloc() either the header or the entire
>> > thing depending on DEFAULT vs INLINE and populate it with either all
>> > segments or just the header, then you should be able to use the same
>> > (custom) read function to serve both cases.
>> >
>> > You should by doing this be able to avoid some duplication, your two
>> > code paths would not diverge and the main difference would be if you
>> > wait or not below (the kfree would have to go in the rproc_free_dump).
>> >
>> > > +
>> > > + /* Wait until the dump is read and free is called */
>> > > + wait_for_completion(&dump_state->dump_done);
>> > > +
>> > > + kfree(dump_state);
>> > > +}
>> > > +EXPORT_SYMBOL(rproc_inline_coredump);
>> > > +
>> > > +/**
>> > > * rproc_default_coredump() - perform coredump
>> > > * @rproc: rproc handle
>> > > *
>> > > diff --git a/drivers/remoteproc/remoteproc_internal.h
>> > > b/drivers/remoteproc/remoteproc_internal.h
>> > > index 28b6af2..ea6146e 100644
>> > > --- a/drivers/remoteproc/remoteproc_internal.h
>> > > +++ b/drivers/remoteproc/remoteproc_internal.h
>> > > @@ -24,6 +24,18 @@ struct rproc_debug_trace {
>> > > struct rproc_mem_entry trace_mem;
>> > > };
>> > >
>> > > +struct rproc_coredump_state {
>> >
>> > This is only used within remoteproc_coredump.c, so please move it there.
>> >
>> > > + struct rproc *rproc;
>> > > + void *header;
>> > > + struct completion dump_done;
>> > > +};
>> > > +
>> > > +enum rproc_coredump_conf {
>> >
>> > How about rproc_coredump_mechanism?
>> >
>> > > + COREDUMP_DEFAULT,
>> > > + COREDUMP_INLINE,
>> > > + COREDUMP_DISABLED,
>> > > +};
>> > > +
>> > > /* from remoteproc_core.c */
>> > > void rproc_release(struct kref *kref);
>> > > irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
>> > > @@ -49,6 +61,7 @@ struct dentry *rproc_create_trace_file(const char
>> > > *name, struct rproc *rproc,
>> > >
>> > > /* from remoteproc_coredump.c */
>> > > void rproc_default_coredump(struct rproc *rproc);
>> > > +void rproc_inline_coredump(struct rproc *rproc);
>> > >
>> > > void rproc_free_vring(struct rproc_vring *rvring);
>> > > int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
>> > > @@ -125,8 +138,14 @@ struct resource_table
>> > > *rproc_find_loaded_rsc_table(struct rproc *rproc,
>> > > static inline
>> > > void rproc_coredump(struct rproc *rproc)
>> > > {
>> > > - return rproc_default_coredump(rproc);
>> > > -
>> > > + switch (rproc->coredump_conf) {
>> > > + case COREDUMP_DEFAULT:
>> > > + return rproc_default_coredump(rproc);
>> > > + case COREDUMP_INLINE:
>> > > + return rproc_inline_coredump(rproc);
>> > > + default:
>> > > + break;
>> > > + }
>> >
>> > I think this better belong inside remoteproc_coredump.c
>> >
>> > Regards,
>> > Bjorn
>> >
>> > > }
>> > >
>> > > #endif /* REMOTEPROC_INTERNAL_H */
>> > > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>> > > index 16ad666..23298ce 100644
>> > > --- a/include/linux/remoteproc.h
>> > > +++ b/include/linux/remoteproc.h
>> > > @@ -459,6 +459,7 @@ struct rproc_dump_segment {
>> > > * @dev: virtual device for refcounting and common remoteproc
>> > > behavior
>> > > * @power: refcount of users who need this rproc powered up
>> > > * @state: state of the device
>> > > + * @coredump_conf: Currenlty selected coredump configuration
>> > > * @lock: lock which protects concurrent manipulations of the rproc
>> > > * @dbg_dir: debugfs directory of this rproc device
>> > > * @traces: list of trace buffers
>> > > @@ -492,6 +493,7 @@ struct rproc {
>> > > struct device dev;
>> > > atomic_t power;
>> > > unsigned int state;
>> > > + unsigned int coredump_conf;
>> > > struct mutex lock;
>> > > struct dentry *dbg_dir;
>> > > struct list_head traces;
>> > > --
>> > > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
>> > > Forum,
>> > > a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2020-05-12 02:42    [W:0.087 / U:1.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site