lkml.org 
[lkml]   [2020]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 3/9] w1_therm: adding sysfs-driver-w1_therm doc
Date
Adding a sysfs-driver-w1_therm documentation file in
Documentation/ABI/testing. It describe the onlys sysfs entry of w1_therm
module, based on Documentation/w1/slaves/w1_therm.rst

Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
---
Changes in v5:
- All patch serie in one .c file
- Correcting some comments
- adding <linux/string.h> include
Changes in v6:
- Formatting code comments according to kernel-doc requirements

Documentation/ABI/testing/sysfs-driver-w1_therm | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-driver-w1_therm

diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm
new file mode 100644
index 0000000..4a85663
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-w1_therm
@@ -0,0 +1,17 @@
+What: /sys/bus/w1/devices/.../w1_slave
+Date: May 2020
+Contact: Akira Shimahara <akira215corp@gmail.com>
+Description:
+ (RW) return the temperature in 1/1000 degC.
+ *read*: return 2 lines with the hexa output data sent on the
+ bus, return the CRC check and temperature in 1/1000 degC
+ *write* :
+ * '0' : save the 2 or 3 bytes to the device EEPROM
+ (i.e. TH, TL and config register)
+ * '9..12' : set the device resolution in RAM
+ (if supported)
+ * Anything else: do nothing
+ refer to Documentation/w1/slaves/w1_therm.rst for detailed
+ information.
+Users: any user space application which wants to communicate with
+ w1_term device
\ No newline at end of file
--
2.26.2
\
 
 \ /
  Last update: 2020-05-10 16:17    [W:0.027 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site