lkml.org 
[lkml]   [2020]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH net] net: broadcom: Imply BROADCOM_PHY for BCMGENET
Hi Florian,

On Sat, May 9, 2020 at 7:12 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
> On 5/9/2020 12:38 AM, Geert Uytterhoeven wrote:
> > On Sat, May 9, 2020 at 12:32 AM Florian Fainelli <f.fainelli@gmail.com> wrote:
> >> The GENET controller on the Raspberry Pi 4 (2711) is typically
> >> interfaced with an external Broadcom PHY via a RGMII electrical
> >> interface. To make sure that delays are properly configured at the PHY
> >> side, ensure that we get a chance to have the dedicated Broadcom PHY
> >> driver (CONFIG_BROADCOM_PHY) enabled for this to happen.
> >
> > I guess it can be interfaced to a different external PHY, too?
>
> Yes, although this has not happened yet to the best of my knowledge.
>
> >
> >> Fixes: 402482a6a78e ("net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed")
> >> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> >> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> >
> >> --- a/drivers/net/ethernet/broadcom/Kconfig
> >> +++ b/drivers/net/ethernet/broadcom/Kconfig
> >> @@ -69,6 +69,7 @@ config BCMGENET
> >> select BCM7XXX_PHY
> >> select MDIO_BCM_UNIMAC
> >> select DIMLIB
> >> + imply BROADCOM_PHY if ARCH_BCM2835
> >
> > Which means support for the BROADCOM_PHY is always included
> > on ARCH_BCM2835, even if a different PHY is used?
>
> It is included by default on and can be deselected if needed, which is
> exactly what we want here, a sane default, but without the inflexibility
> of "select".

I stand corrected: I can confirm the "imply" no longer selects the target
symbol, but merely changes the default.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2020-05-10 12:03    [W:0.044 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site