lkml.org 
[lkml]   [2020]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 06/12] i2c: designware: slave: Set DW I2C core module dependency
Date
DW APB I2C slave code in fact depends on the DW I2C driver core, but not
on the platform code. Yes, the I2C slave interface is currently supported
by the platform version of the IP core, but it doesn't make it dependent
on it. So make sure the DW APB I2C slave config is only available if the
I2C_DESIGNWARE_CORE config is enabled.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
drivers/i2c/busses/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 14368c46cb63..368aa64e9266 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -541,8 +541,8 @@ config I2C_DESIGNWARE_PLATFORM

config I2C_DESIGNWARE_SLAVE
bool "Synopsys DesignWare Slave"
+ depends on I2C_DESIGNWARE_CORE
select I2C_SLAVE
- depends on I2C_DESIGNWARE_PLATFORM
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C slave adapter.
--
2.25.1
\
 
 \ /
  Last update: 2020-05-10 11:51    [W:0.146 / U:4.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site