lkml.org 
[lkml]   [2020]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 29/37] docs: networking: device drivers: convert qualcomm/rmnet.txt to ReST
Date
- add SPDX header;
- add a document title;
- mark code blocks and literals as such;
- mark tables as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../networking/device_drivers/index.rst | 1 +
.../qualcomm/{rmnet.txt => rmnet.rst} | 43 ++++++++++++-------
MAINTAINERS | 2 +-
3 files changed, 30 insertions(+), 16 deletions(-)
rename Documentation/networking/device_drivers/qualcomm/{rmnet.txt => rmnet.rst} (73%)

diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst
index 55837244eaad..66ed884548cc 100644
--- a/Documentation/networking/device_drivers/index.rst
+++ b/Documentation/networking/device_drivers/index.rst
@@ -44,6 +44,7 @@ Contents:
microsoft/netvsc
neterion/s2io
neterion/vxge
+ qualcomm/rmnet

.. only:: subproject and html

diff --git a/Documentation/networking/device_drivers/qualcomm/rmnet.txt b/Documentation/networking/device_drivers/qualcomm/rmnet.rst
similarity index 73%
rename from Documentation/networking/device_drivers/qualcomm/rmnet.txt
rename to Documentation/networking/device_drivers/qualcomm/rmnet.rst
index 6b341eaf2062..70643b58de05 100644
--- a/Documentation/networking/device_drivers/qualcomm/rmnet.txt
+++ b/Documentation/networking/device_drivers/qualcomm/rmnet.rst
@@ -1,4 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+Rmnet Driver
+============
+
1. Introduction
+===============

rmnet driver is used for supporting the Multiplexing and aggregation
Protocol (MAP). This protocol is used by all recent chipsets using Qualcomm
@@ -18,17 +25,18 @@ sending aggregated bunch of MAP frames. rmnet driver will de-aggregate
these MAP frames and send them to appropriate PDN's.

2. Packet format
+================

a. MAP packet (data / control)

MAP header has the same endianness of the IP packet.

-Packet format -
+Packet format::

-Bit 0 1 2-7 8 - 15 16 - 31
-Function Command / Data Reserved Pad Multiplexer ID Payload length
-Bit 32 - x
-Function Raw Bytes
+ Bit 0 1 2-7 8 - 15 16 - 31
+ Function Command / Data Reserved Pad Multiplexer ID Payload length
+ Bit 32 - x
+ Function Raw Bytes

Command (1)/ Data (0) bit value is to indicate if the packet is a MAP command
or data packet. Control packet is used for transport level flow control. Data
@@ -44,24 +52,27 @@ Multiplexer ID is to indicate the PDN on which data has to be sent.
Payload length includes the padding length but does not include MAP header
length.

-b. MAP packet (command specific)
+b. MAP packet (command specific)::

-Bit 0 1 2-7 8 - 15 16 - 31
-Function Command Reserved Pad Multiplexer ID Payload length
-Bit 32 - 39 40 - 45 46 - 47 48 - 63
-Function Command name Reserved Command Type Reserved
-Bit 64 - 95
-Function Transaction ID
-Bit 96 - 127
-Function Command data
+ Bit 0 1 2-7 8 - 15 16 - 31
+ Function Command Reserved Pad Multiplexer ID Payload length
+ Bit 32 - 39 40 - 45 46 - 47 48 - 63
+ Function Command name Reserved Command Type Reserved
+ Bit 64 - 95
+ Function Transaction ID
+ Bit 96 - 127
+ Function Command data

Command 1 indicates disabling flow while 2 is enabling flow

-Command types -
+Command types
+
+= ==========================================
0 for MAP command request
1 is to acknowledge the receipt of a command
2 is for unsupported commands
3 is for error during processing of commands
+= ==========================================

c. Aggregation

@@ -71,9 +82,11 @@ packets and either ACK the MAP command or deliver the IP packet to the
network stack as needed

MAP header|IP Packet|Optional padding|MAP header|IP Packet|Optional padding....
+
MAP header|IP Packet|Optional padding|MAP header|Command Packet|Optional pad...

3. Userspace configuration
+==========================

rmnet userspace configuration is done through netlink library librmnetctl
and command line utility rmnetcli. Utility is hosted in codeaurora forum git.
diff --git a/MAINTAINERS b/MAINTAINERS
index 91da0be7f69e..0054a0a87d5f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14066,7 +14066,7 @@ M: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
M: Sean Tranchetti <stranche@codeaurora.org>
L: netdev@vger.kernel.org
S: Maintained
-F: Documentation/networking/device_drivers/qualcomm/rmnet.txt
+F: Documentation/networking/device_drivers/qualcomm/rmnet.rst
F: drivers/net/ethernet/qualcomm/rmnet/
F: include/linux/if_rmnet.h

--
2.25.4
\
 
 \ /
  Last update: 2020-05-01 16:47    [W:0.158 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site